Thangapandian A N

6 Questions 9 Answers 0 Followers

Questions related from Thangapandian A N

For a same problem, which answer will be accurate.?

For a same problem, which answer will be accurate.? (a) Experimental (b) Numerical (c) Analystical And what are the reasons for the inaccuracy in each method.?

11 November 2017 7,224 7 View

Kernel Misorientation Number (KAM) Could i get a basic notes about KAM...?

What is Kernel Misorientation Number (KAM).? Could i get a basic notes about KAM...?

12 December 2016 7,422 0 View

Is it possible to read the field output variable at certain nodes, at various time interval.?

I am working in Simulation of continuous deformation process. In which, i have to measure the stress, strain data at certain nodes at different time. Is it possible to read the field output...

11 November 2016 2,230 3 View

Will strain rate changes with respect to (different) temperature for same cross head speed and same alloy.?

I tested an aluminum alloy at three different temperatures with same cross head speed. Now i want to calculate strain rate. How can i calculate? In specific I want to know, will it change with...

04 April 2016 2,624 13 View

Power law k and n value for heat treated and non-heat treated aluminium samples..?

Standard value are available in Internet for k and n. Can we take the k and n value as constant for Heat treated and non heat treated specimens. Or will it change..? If changing means, what is the...

02 February 2016 350 0 View

Tensile strength not matching with Standards...?

I have tested the cold worked AA 6063 aluminium alloy for the tensile strength. The composition of the alloy is matching with standards. But the strength was very poor in this case. Which has no...

01 January 1970 8,543 7 View