Please help. We are working on a project to make CONDUCTIVE GLUE meant to replace soldering. it should be environmentally friendly?

More Ashton McNamara's questions See All

What is the interaction of carbon graphite with PDMS? How to prepare carbon pdms composite?

We are working on pmds hydrophobic coating and wish to integrate it with graphite from environmental sources

10 November 2017 8,244 2 View

What is the best glassware or vessel to carry out microwave assisted preparation of graphene oxide?

I am looking at preparation of graphene oxide by microwave but when I used top and bottom, they break. Please help.

10 November 2017 6,196 4 View

Please help. We are working on a project to make CONDUCTIVE GLUE meant to replace soldering. it should be environmentally friendly?

Please give us idea on how to make conductive glue from waste or carbonized materials.

10 November 2017 3,079 2 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

Is stone a sustainable material? Is it a sustainable approach to use natural stone waste in architecture?

I'm designing a zero-waste restaurant and considering using marble waste to make some tables and a bar countertop. My clients think it's not "sustainable enough" and I would like to have more...

01 March 2021 4,326 7 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Bachir Achour

Dear Shane,

Here is a link that could be useful.

http://www.instructables.com/id/Make-Conductive-Glue-and-Glue-a-Circuit/

With my best regards

Prof. Bachir ACHOUR

Mushtaq Ahmad

Making a conductive adhesive

http://smackaay.com/2009/01/13/making-a-conductive-adhesive/

Hamit Can

https://www.scribd.com/mobile/document/57605207/Make-Conductive-Glue-and-Glue-a-Circuit