Dear researchers,
Does anyone knows approximate passive film composition of the film formed by interaction of iron or steel with chromate inhibitors?
https://www.sciencedirect.com/topics/materials-science/passive-film
Dear RG colleges, Is it possible to calculate energy and power of a single electrode from constant current discharge. For the whole battery or pseudocapacitors it is relatively easy, integrating...
06 July 2019 4,340 5 View
Does any one knows the solubility of AgCl2- complex in chloride containing solutions? eg 0.5 M NaCl
11 December 2018 8,553 0 View
Does any knows how to prepare silver chloride cathode for Mg water activated batteries?
11 December 2018 929 4 View
Does anyone know a reliable PPy HOMO and LUMO positions vs. absolute vacuum scale? I have some data 5 eV for HOMO, 2.45 eV (dedoped) and 3.3 eV (doped) for LUMO. Is it correct, and are they pH...
06 July 2014 7,571 1 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,176 0 View
Generally, the target material is Mo, Co, Cu, Fe, Cr, etc, so on what basis should we choose this material?
31 July 2024 5,824 0 View
Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container
30 July 2024 7,326 1 View
I am currently working on a project that involves extracting cell membranes, for which we disrupt the cells using sonication. During the initial extraction process, we add protease inhibitors to...
30 July 2024 7,077 1 View
Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco
29 July 2024 2,163 1 View
The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...
27 July 2024 8,508 0 View
Please investigate the effect of temperature and strain rate of hot deformation and the formation of delta ferrite in martensitic stainless steel 410?
25 July 2024 9,408 0 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View