I am running 802.11 simulations in NetSim and want to understand how the data rate is determined for different MCS in 802.11.
Thank you.
Please see
Article Performance Evaluation of DSR, OLSR and ZRP using NETSIM Simulator
With the knowledge of MCS index and bandwidth of the channel data rate is set in the following manner
1: Gets the number subcarriers that are usable for the given bandwidth of the medium.
2: Gets the Number of Bits per Sub Carrier (NBPSC) from selected MCS
3: Number of Coded Bits Per Symbol (NCBPS) = NBPSC*Number of Subcarriers
4: Number of Data Bits Per Symbol (NDBPS) = NCBPS*Coding Rate
5: Physical level Data Rate = NDBPS/Symbol Time (4micro sec for long GI and 3.6 micro sec for short GI)
I am running a simple file-transfer application over TCP in NetSim and want to find out how to calculate the file-transfer throughput, round-trip time(RTT), no. of re-transmitted packets etc.
10 November 2019 2,719 4 View
I would like to plot the TCP congestion window of a node. Currently, I am doing it from the packet trace in NetSim. However, I would prefer to do it in wirehshark since it is the industry standard...
09 October 2018 5,606 9 View
Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...
06 August 2024 4,953 0 View
Hello guys! Do you have experience running a Oaxaca-Blinder decomposition on R applying person weights. How do you suggest doing it? I have a variable PERWT which gives more information on how...
04 August 2024 6,033 0 View
Hello Everyone I have a question about structure for connectivity analysis on sources. My goal: preprocess and cut data into trials create headmodels, using template MRI file perform source...
30 July 2024 2,744 1 View
When I run autogrid4 it says: autogrid4: ERROR: Unknown receptor type: "Cr" -- Add parameters for it to the parameter library first! Look forward to your reply.Thank you so much!
29 July 2024 488 0 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...
28 July 2024 6,553 1 View
I am preparing to run a lot of samples on a 384 well plate and I wanted to test if any well in my PCR machine is dead so as not to lose any data. I would really appreciate help with how I can do...
24 July 2024 8,172 1 View
Hello everyone, I am conducting
22 July 2024 8,085 11 View
Hi, We have collected several images for two independent runs of an experiment using two different confocal microscopes and settings. Thus, the intensity values collected through ImageJ were...
22 July 2024 8,722 0 View
If you don't understand my question let me know
21 July 2024 563 1 View