Would like to setup AC electrospinning.
Thanks
I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...
28 February 2021 298 3 View
I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...
25 February 2021 2,615 3 View
Electrospining method is important for production of nanofiber .If doped with nanoparticles ,can be used for remove of contaminant such as VOC , but don't have mechanical strengh . For finding a...
24 January 2021 7,290 3 View
The observed bandgaps are 3.8 eV and 3.4 eV for spin-coated and electrospun films, respectively. What are the possible reasons?
08 January 2021 5,646 6 View
Hi i was trying to deposit the polystyrene nano fibers on aluminum substrate... Can anyone help me how to enhance the nano fiber's adhesion to the substrate? Like annealing pr vacuum drying ? Any...
16 November 2020 1,735 7 View
is there any work on the electrospinning of SPPSU as a membrane in the literature, thank you ?
25 October 2020 770 8 View
I am looking for a non-toxic and ineffective hydrogel that can be converted into fibers by electrospinning. I also need to know its solvent. Since I am going to use these fibers for medical...
14 October 2020 9,936 8 View
Hansen solubility parameters determine hoe a polymer is soluble in a the ifferent solvent. But how it helps in case of solidifying a fiber during electrospinning process?
14 September 2020 4,570 2 View
Dear community, I am trying to conduct electrospinning with 15% of PCL and I would like to do it with chloroform or dicloromethene. When I try to do it I do not manage to form a Taylor Cone that...
06 August 2020 3,823 6 View
I am trying to electrospin polymer along with higher concentration of salt (more than 2% of salt). What might be the suitable polymer and suitable set up parameters?
30 July 2020 9,256 5 View
