Modeling and Simulation of Radial Piezoelectric Transducer

More Faouzi Ghribi's questions See All

What is the recommended scanning range in degrees (minimum and maximum angles) and the recommended step size for the X-ray diffraction XRD analysis?

What is the recommended scanning range in degrees (minimum and maximum angles) and the recommended step size for the X-ray diffraction analysis of a composite (XLPE with zinc oxide)?

29 March 2024 7,768 4 View

Can anyone help me in the following error in Comsol: singularity error?

Hi all, I am trying to simulate the bipolar charge transport model in an underground power cable. In comsol, I used electrostatics, heat transfer in solids, and transport of diluted species. when...

23 July 2023 7,449 1 View

LD50 Determination of bee venom?

Dear all, I would be thankful to who can provide me a detailed method to determine LD50 of Bee venom in mice/rats.

17 June 2021 2,327 3 View

How can I prepare DSS time series precipitation file for input to HEC-HMS from TRMM Satellite rainfall dataset?

Dear evreyone I tried to import a time series of netcdf files containing precipitation grid data in HEC-HMS by converting netcdf file to .dss file. I have followed the tutorial in the link...

15 February 2021 8,054 0 View

Modeling and Simulation of Radial Piezoelectric Transducer?

I need some one working in comsol

10 December 2020 8,564 3 View

To apply the laws of thin structures for a composite material?

Kindlya can any one tell me it is possible to use the same laws of thin metallic structures for the composite material

06 November 2018 7,208 3 View

Looking for experts of Open Innovation and/or Digital transformation!

Hello, my dear network! We are looking out for experts in the fields of #Open_innovation and #digital_Transformation. Ideally, with interests in the areas of #hospitality and #tourism_management....

01 January 1970 1,704 4 View

Can anyone explain me how to measure galvanostatic charge discharge of supercapacitors method using Solartron, SI: 1287 instrument ?

01 January 1970 6,041 0 View

Problems about acousto-optic coupling in Comsol, how to check whether the moving mesh is correct?

I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...

13 August 2024 9,795 0 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

Is it necessary to covary exogenous constructs in a structural model?

I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...

03 August 2024 6,028 4 View

Amin Ghaffarzadeh Bakhshayesh

Hi,

Please see the following links:

https://www.comsol.com/blogs/piezoelectric-materials-crystal-orientation-poling-direction/

https://www.comsol.com/video/tonpilz-piezo-transducer-tutorial

https://www.comsol.com/video/piezoelectricsimulations-comsol-multiphysics

Faouzi Ghribi

Thank you

Morteza Maleki

Hi dear Faouzi Ghribi . Please define the problem you want to solve, or a base paper.