Glass Capillary microfluidics,cholesteric shells
I have prepared 2wt% Chitosan in 0.5% Acetic acid aqueous solution. To form Hydrogel sheets with ionic cross linking with silver nitrate, i have immersed the drop casted solution on Glass slide in...
11 February 2020 3,560 2 View
I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?
08 August 2024 8,915 0 View
If from a geometric perspective the non-halogens, non-noble gases have more empty spots in their valence shell, and the filling/exiting of any of the empty spots in the shell constitutes a...
03 August 2024 4,787 2 View
I am using a windows system, what software I should use for hydration shell analysis with molecular dynamics?
02 August 2024 3,143 4 View
Hello, I'm planning a shell exchanging experiment with two marine, hermit crab species inside of a tank. I only have one tank available for this experiment. I plan on running 30-40 shell...
20 July 2024 5,676 3 View
I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...
10 July 2024 2,937 3 View
Hi all, I am looking glass cilinders that have an open flat bottom and top. Preferably with the inner diameter in the range of 2 cm. It's similar to the ones found on multi-electrode arrays for...
06 July 2024 5,846 1 View
I'm working on photoelectrochemical water splitting, and the material is core-shell nanoparticles with a TiO₂ shell and a ferrite core. The films of the core-shell nanoparticles were prepared...
05 July 2024 4,275 0 View
If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...
03 July 2024 2,371 1 View
I use PDMS to build a microfluidic system, but it is not hardening at all, although I use TEOS as a cross-linker and also ATPES in a ratio of 1:10, and it's been 3 days at 80 degrees of 3 ml cast...
01 July 2024 604 3 View
Hi Everyone, I plan to deposit a catalyst (TS-1@Co-PDA, in the core: TS-1 zeolite with a shell of Polydopamine designed with Cobalt) on a rotating ring-disk electrode (RRDE) to evaluate the...
29 June 2024 8,203 3 View
