Is boiling good for convective heat transfer?

Let's say we have a turbulent flow (water at the temperature of 25 degrees Celsius) over a heated block at atmospheric pressure. Now if at the solid-liquid interface the local temperature is...

10 November 2018 7,492 2 View

Axisymmetric swirl problem on staggered grid

I am coding axisymmetric flow with swirl phenomenon. My axisymmetric solver is working fine but for staggered grid arrangement what should be the arrangement for w velocity in the grid (just like...

06 July 2017 3,631 0 View

How to model simple magnetohydrodynamics (MHD) flow using fluent? Any tutorial?

I want to model MHD flow in a circular pipe using fluent for learning purpose. Can anyone help me in that or if any tutorial is available than it would be really helpful.

09 October 2015 9,452 2 View

How can I write the boundary condition for lid-driven swirling flow in a confined cylindrical cavity for "lid" part?

Particularly i am having confusion in deciding boundary condition for swirl part.

02 March 2015 6,148 4 View

No title

11 December 2014 2,564 10 View

Has anyone done CFD modeling of a HT-SOFC using Fluent 13.0?

.

01 February 2014 5,429 1 View

Is there anyone working on the CFD modelling of Solid Oxide Fuel Cell in Fluent?

Solid Oxide Fuel Cell

07 August 2013 2,480 1 View

Please suggest how to find volumetric heat release rate (HRR) in FLUENT using "Custom Field Functions"?

Micro-combustion.

06 July 2013 5,547 0 View

What are the advantages of the organic rankine cycle using supercritical CO2? Can we see it as the substitute to supercritical vapor power cycle?

For power generation

01 February 2013 4,592 1 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Can we distinguish the type of free fluid inside the pelvic and abdominal cavities whether blood or serous fluid using the ultrasound?

during ultrasound examination of acute abdomen, sometimes we see free fluid , can we know the type of fluid ,whether blood or not , using ultrasound only? if yes , what are the sonographic...

01 March 2021 7,476 4 View