Is the Bredt's rule applicable to trans decalin?

More Geetika Arora's questions See All

What is the difference between Caputo fractional derivative and conformable fractional derivative?

While working on fractional order derivatives I found the behavior of conformable derivative is different from Caputo fractional derivative. Therefore, I want to know the difference between these...

08 July 2024 4,057 1 View

How to position legends below the graph (outside) in Mathematica?

Hello All, I want legends to be positioned below the graph (outside), but in two or three rows accordingly, such that they do not extend beyond the vertical boundaries of the graph. Can anyone...

23 April 2024 7,447 1 View

Can Ostwald viscometer be helpful in measuring viscosities of Non-Newtonian fluids?

I want to check the viscosity of the non-Newtonian fluid using an Ostwald viscometer.

14 January 2024 2,226 6 View

Wrong or mistaken profile?

I had been facing the issue that my name is considered for the publications where neither I am the author nor the co author there is some mistake kindly help to resolve the issue

03 November 2023 9,891 2 View

I am facing difficulties in opening a time series recording file in ImageJ. an error message with insufficient memory comes up. Any solutions?

The available memory keeps changing even if no file is open. The files that I want to open are large files of around 7-10 GB

22 July 2023 8,228 1 View

On the Google search page, when can we expect to see a "Search with AI" button between the default "Google Search" and "I'm Feeling Lucky" buttons?

On the Google search page, when can we expect to see a "Search with AI" button positioned between the default "Google Search" and "I'm Feeling Lucky" buttons?

10 May 2023 7,281 0 View

In 304H Stainless Steel which is the best etchant that can be used to reveal microstructure?

Kindly tell the electrolytic polishing reagent as well as chemical and electrolytic etchant for 304H austenitic steel.

19 March 2023 8,528 2 View

How can u find mean and standard deviation from an FTIR Graph?

The peaks of an FTIR Graph denote the absorbance values .How can you find the mean absorbance value through MATLAB or is there any other way to do do

13 March 2023 3,982 4 View

How to prepare RNA loading dye without xylene cynol?

I need to prepare a dye to mix with my RNA sample before running on gel. The protocols obtained online contain xylene cyanol as a constituent. Is there a recipe without xylene cyanol? Please...

26 February 2023 8,789 0 View

What are key practical techniques to do Climate Smart Agriculture (CSA)?

Looking for Climate-Smart agriculture (CSA) techniques which can be practically implemented in the existing agricultural fields i.e. on ground while farming.

26 January 2023 2,537 5 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Should I include H atom into C3N5 when i am doing DFT modelling?

Hi all, my experimental XPS results shown that my C3N5 sample consists of N-H bond, hence in this case I should incorporate the N-H bond into my DFT modelling. However, I do notice several papers...

07 August 2024 8,414 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

What are the perfect mathematical model for a solar-powered ship implementation?

A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids

28 July 2024 4,985 1 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

What is the principle/mechanism behind aging of carbon (graphite) containing refractory mix for isostatically pressed refractories?

The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.

23 July 2024 3,205 0 View

Abdelkader BOUAZIZ

Dear Geetika Arora, decalin has no double bond and no bridge. How are you going to apply such a rule. My Regards

Jerome Peter

https://www.masterorganicchemistry.com/2014/09/02/bredts-rule-and-summary-of-cycloalkanes/

Riaz A. Khan

Decalin as such has no possibility of that. Decalin based natural products lack the ring junction double bond. Check the diterpenics, sesqui, and triterpene skeleton and examples, so is the case in steroid based products!