Is there any published or unpublished statistics on dropout rate (Dose1 to Dose-2) for Covid-19 vaccination in India, US, UK or any other country?

Are there any published or unpublished statistics or papers on the dropout rate (Dose1 to Dose-2) for Covid-19 vaccination in India, USA, UK, or any other country where vaccination has started at...

28 February 2021 4,237 1 View

CUDA Out Of Memory (OOM) error while using GPU?

I'm training a neural network (E3D-LSTM) for spatio temporal video prediction. It's quite a big network that has millions of parameters. The model is training perfectly when using my 12 CPU cores,...

25 December 2020 1,229 3 View

Which area i should focused in FSW of Al-Steel with interlayer?

Can anyone give me suggestion about topic to carry my research? As i see there is number of publication in this area.so i am not getting that which objective i should keep for my research.

04 September 2020 2,286 2 View

Why uwb antenna group delay measurements taken at 30 cm?

UWB Antennas group delay measurements are carried by keeping antenna separated by 30 cm ftf or e2e configuration. The literature survey reveals it to be the abeyance of far-field condition.......

02 September 2020 6,404 3 View

Comsol electromagnetic simulation. How to give a mesh for certain micrometer when my tool is in millimeter. The current density is so small. Pls help?

Hi, I am trying to perform mesh convergence and I found out there is no stable temperature value I obtained. So, I calculated the skin depth and it was around 0.00011mm. It is so small in...

24 August 2020 9,060 2 View

Is research on antimicrobial peptides worth it?

In the age of Mutiresistant drug bacterium(s) and eukaryotic pathogenic organisms or superbugs, we are in a constant lookout for new treatments and especially antibiotic drugs. Two approaches, in...

23 August 2020 3,915 3 View

Which option (SFA-Cross Or DEA-DMU) is best to measure the individual efficiency (for a sample size of 450 farmers)?

I am working on a set of data, collected from a field survey. I am looking forward to measure the the level of technical efficiency of type of irrigation channels (Solar pump set/ Diesel pump set...

06 August 2020 2,510 3 View

How to increase accuracy in Speech emotions recognition ?

In speech based emotion recognition, for individual artists almost get 90 percentage of accuracy using neural network, but accuracy is decreased up to 70 percentage for entire speech corpus. How...

19 July 2020 4,900 1 View

What are the different methods of estimating snow melt contribution in runoff?

I want to estimate the runoff due to rainfall but the data I have, contains final runoff (i.e. runoff + snowmelt) so is there any method to calculate the contribution of snowmelt in the final...

16 July 2020 6,415 3 View

How to model in COMSOL (Induction heating) . A current applied for 600A for 10 min and continue then 100A for next 5 min. Can someone help me please?

Hi I wanted to model Induction heating in comsol. Apply a current of 600A for 10 minutes in my coil and then a 100A current for 5 minutes. I could not find much of tutorials. I do not know where...

10 April 2020 5,565 12 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

How optimize the Size Exclusion Chromatography?

Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...

01 March 2021 2,215 2 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to dissolve cross-linked Amberlite IRC120 H, hydrogen form resin?

Hello all, I have used Amberlite IRC120 H, hydrogen form acidic cation-exchange resin for the ion-exchange of waterglass [sodium silicate solution -- 40% Sodium silicate (mol ratio > 3.2)...

21 February 2021 5,614 3 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

Best protocol for immunogold using araldite resin ?

Hello, We perfom Tokuyasu method (ultrathin cryo sectionning) very often to make immunogold experiments. This time, we need to make a PLT technique with K4M or LR white resin. Our results were...

14 February 2021 4,959 1 View

How to improve the adhesion of epoxy coating on steel substrate? Which factor affects?

I am facing a problem regarding a de-adhesion problem with the coating. A brief description of my methodology is given below. I am using mild or Low Carbon steel as a substrate and I polish the...

14 February 2021 2,167 4 View

Purified protein requires Calcium for activation, but the elution buffer I used seems to interact with Calcium, help?

09 February 2021 6,946 4 View

What is the best visualisation solvent for xylooligosaccharides using TLC?

I am interested in using TLC to detect non-linear xylooligosaccharides. What would be the best visualisation solvent? Would aniline phthalate solution be suitable? I have also seen people...

02 February 2021 7,748 3 View

FLAG purification, elution doesn't have protein?

I am purifying a heterotetramer, with one subunit having a 1D4 tag and the other having a FLAG tag. I purified from Sf9 with HBS pH7.3 and 0.002%LMNG first with Anti-1D4 resin and got an adequate...

02 February 2021 3,860 1 View