Is m-value specification in bending beam rheometer test suitable for highly modified rubberized binders?

Boudnani Zeine Elabidine @Boudnani-Zeine-Elabidine

06 March 2020 0 2K Report

As highly modified rubberized binders tend to be flexible than stiffer by showing less stiffness and higher deflections in BBR test, that means higher ability to resist cracking at low temperature.

Badges
Science topic

Similar topics
Filing

More Boudnani Zeine Elabidine's questions See All

Why the rubberised mixes show higher cracking resistance by showing higher fracture energy as rubber content increases?

For experts, specialists, researchers, academic and students: Why the rubberised mixes show higher cracking resistance by showing higher fracture energy as rubber content increases?. In other...

09 February 2020 326 0 View

How can we estimate the costs and environmental risks reduction of the Warm mix Technology on rubberized mixtures during Production and construction?

Numerical methods, experimental Methods...etc

26 December 2018 5,625 2 View

Time Limit and CPLEX ??

Hello, I am using ILOG CPLEX and I am running an Integer optimisation problem that takes about 3 days to complete the 0.0%. I need to terminate the program after a certain time limit and...

05 December 2018 5,949 6 View

Are there any specifications that focus or fix the shearing speed of mixing for Asphalt-Rubber high viscosity (field blend)?

The absence of shearing mixing specifications for asphalt rubber is still a black point in the agencies specifications despite its high effect on the viscosity of the final asphalt rubber so there...

15 October 2018 8,034 1 View

What are the latest technologies in rubberized asphaltic mixes ? at which level has the science achieved the crumb rubber waste technology?

Just i want to see how much the science treats the use of tires waste in highways construction at all levels.

11 February 2018 8,347 2 View

RNA later for the preservation of RNA in fecal samples at room temperature for one day (37°C)?

I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...

06 August 2024 1,367 3 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

What is the best way to drop a plasmid?

Please address the best way to drop a plasmid. Background: I have a "bait" plasmid resistant to kanamycin and a "prey" plasmid resistant to carbenicillin. After many rounds of streaking on...

25 July 2024 2,532 3 View

How to add viscosity into a hyperelastic material such as Mooney-Rivlin rubber in LS-DYNA?

Hi, I am working on a head FE model and want to try different material types on brain. I read some papers that use Mooney-Rivlin rubber model and wondering if i can add viscosity into it. Is it...

24 July 2024 5,908 0 View

Why my gel electrophoresis has smearing?

Greetings. I’m currently running a nested pcr for giardia. My mastermix comprised of 3mM Mgcl2, 5unit of taq polymerase, 0.2uM of forward and reverse primers each respectively and 0.2mM of dNtp...

22 July 2024 9,761 5 View

Appearance of crystallization peak in heating cycle of DSC test?

For which types of polymers, the crystallization peak in heating cycle of DSC test can be observed and for which types cant? In another word, when this exothermic crystallization can be observed...

18 July 2024 348 3 View

My rosetta strain has chloramp resistance and i am transforming my plasmid with amp resistance but not getting colonies on chloramp/amp LB plates?

I have done the same procedure with BL21 and pLysE but i got colonies but multiple times on rosetta i did but not getting. can anyone explain what would have gone wrong?

12 July 2024 9,904 1 View

Quelles applications innovantes peuvent bénéficier des propriétés des géopolymère?

Les géopolymères offrent plusieurs propriétés intéressantes qui peuvent être exploitées dans diverses applications innovantes : 1. Construction durable : - Bétons à faible empreinte carbone -...

10 July 2024 7,457 1 View

Would anyone care to recommend an inexpensive waterproof serviceable (e.g., batteries can be changed) temperature logger?

I've been using Hobo pendants for years but they are up from less than $50 a few years ago to over $100, and I'm in need of an alternative.

08 July 2024 7,164 1 View