Is it right to mixed Secant precast concrete pile with nailing??
Dear all, I do research on a kind of clay and use NaOH as an alkali-activator for stabilization. The pH 2,4,6 mol. of NaOH solution are 12.9,13, and 13.1, respectively. The pH of natural soil is...
09 October 2019 3,813 2 View
Dear all, What software do you recommend for plagiarism checking of technical papers? Regards MJM
09 October 2018 613 13 View
Dear All, We know that acid treatment usually done for biomass ash (like Rice husk ash) activation. According to the some researches acid treatment (by some acids like HCL) increases specific...
08 September 2018 7,251 0 View
Dear all, Does anyone know an address that shows How long does it take to publish a paper?? However, there are some in Elsevier ( https://journalfinder.elsevier.com ) and Springer ( Springer...
06 July 2018 4,577 18 View
Hi everyone, I want to know what is the best temperature and duration for producing ash from agricultural waste?? regarding that I want to use it as Alkali activator for clay stabilization....
10 November 2017 6,507 4 View
Dear all, As it is known, the pH of distilled water increase with dissolving ashes in it. It is because of some metallic oxides contents like NaO, k2O, etc, of the ashes. So, I want to know which...
10 November 2017 1,183 6 View
Hi everyone, We have to pour concrete in temperature of about 40 degree Celsius. does anyone have good technique for lowering the temperature of concrete?? We lower the temperature to near 32...
06 July 2017 9,592 3 View
06 July 2017 6,352 4 View
Hi every one I want to know if XPS (X-ray photoelectron spectroscopy ) can be used to introducing bonds between chemically stabilized clay?? Regards
01 February 2017 1,350 4 View
What is the most effective way to Reinforced fine soils like clay ? for example could strip reinforcement used for fine soils??? As reinforced walls should be backfilled with coarse materials like...
08 September 2016 5,409 4 View
can anyone help me in this, it will help me with my research work
01 March 2021 834 3 View
I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...
01 March 2021 736 3 View
Nanotechnology in concrete materials
01 March 2021 3,379 3 View
I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...
27 February 2021 6,801 3 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View
In Finite element software like ANSYS , there is difficulty in obtaining direct results of twisting of concrete members because SOLID65 which is the unique element designed to represent concrete...
26 February 2021 3,806 2 View
Looking for the quantity of cement, sand, and gravel of footings and columns. Thank you!
25 February 2021 3,092 2 View
Colleagues, I have been using ANSYS to model concrete strengthened FRP sheets, but less than happy with it. Any has recommendation for efficient, easy to use FE program for modelling concrete...
22 February 2021 7,528 3 View
Hi I am running a simulation in Abaqus for a concrete beam. Its fine aggregate replaced with sea-sand. I was wondering if I could find studies that measured the ultimate strain of concrete made...
22 February 2021 6,409 2 View
Hi, I have modelled a three-span arch bridge with soil fill over along with pedestals. The FE modelling is done in LUSAS with HX8M solid elements (i.e. 3D solid modelling). The non-linearity is...
20 February 2021 1,346 2 View
