Is it possible to have energy recovery (%) more than 100% in HTL for any biomass?

30 April 2021 1 5K Report

If dry biomass feedstock have little HHV (i.e. 8-12 MJ/Kg) and biocrude have high HHV (>30 MJ/Kg) with biocrude yield 30-40%. Please explain it details.

Md Bashirul Islam

It is generally not possible to achieve energy recovery greater than 100% because this would imply generating more energy than was originally contained in the biomass itself. This principle adheres to the laws of thermodynamics.

Badges
Science topic

More Md Bashirul Islam's questions See All

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

Can we mark 'EFL Learners shifting from general digital to AI technologies' as technological transition?

After COVID-19 it has seen that EFL learners technological affiliation has raised. In addition, in the post-COVID period learners started to engage AI technologies like ChatGPT while learning...

08 August 2024 8,964 4 View

How to convert g/kg Humic acid dose to kg/ha?

I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?

02 August 2024 7,186 6 View

Bangladesh government's reported plan to use lethal force against protesters? We need help Urgently ?

Please Help Us Urgently

01 August 2024 711 1 View

"How has Leader Sheikh Hasina's government allegedly responded to student protests, including the reported killing of over 500 students ?

"How has Leader Sheikh Hasina's government allegedly responded to student protests, including the reported killing of over 500 students, as well as arrests, custody, remand, and the involvement of...

29 July 2024 2,181 7 View

Can a photocatalytic degradation of methylene blue from red mud be pseudo- zero order kinetics?

My photocatalyst from solid waste red med. Dye is methylene blue My all parameter study is showing zero order. How to prove it further that the reaction in zero order?

29 July 2024 7,404 1 View

How to use ERP System in Global University ?

27 July 2024 8,229 0 View

How to calculate pseudo order kinetics?

I know the rate law. But for my photo-catalytic experiments, first 90min is adsorption (dark) and next 150min is under UV light (total 240min). How to remove the adsorption part for calculation?...

21 July 2024 8,807 6 View

How can I calculate spin texture using Quantum Espresso for non-colinear case ?

I want to calculate the spin texture for the electronic band structure obtained from SOC calculation. Is there any way for calculation of spin texture using quantum espresso??

19 July 2024 8,571 1 View

What is the average energy consumption per gate operation with superconducting qubit?

Could you provide information on the average energy consumption per gate operation when using superconducting qubits, specifically focusing on the microwave power required to implement gates? I...

15 July 2024 954 0 View

How to develop investments in renewable energy sources?

08 August 2024 5,112 3 View

Is there any cases algae not using the nutrient from the wastewater and grow normally?

I am working on microalgae cultivation using waste water. The initial concentration of nutrients were less but the microalgae has achieved biomass growth of 2 g/L. The final concentration of...

08 August 2024 4,812 2 View

Recovery rate after peptide desalting using Sep-pack C18 1 cc Vac Cartridge?

Recently I'm trying to use Sep-pack C18 1 cc Vac Cartridge (Waters: SKU: WAT054955) to desalt digested peptides. However, the recovery rate is usually 40-60%. What is the normal recovery rate?

31 July 2024 6,544 11 View

Is the black sediment consider as sand? If not, how can I filter it out?

Hi researchers! I'm working on soil texture analysis, and the end result for sand is doubtful because there is black sediment appearing after drying, as shown in the figure. Is it considered sand?...

30 July 2024 557 2 View

Is artifacts in XPS possible to build high deviation in binding energy larger than 5 eV??

Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...

30 July 2024 9,824 2 View

Where to start the Analytical model for Dry sliding wear of metal surface ?

I am doing research on wear mechanism of the additive manufactured metal parts under dry condition. Please share the reference to start the analytical modelling of the wear prediction.

29 July 2024 6,115 0 View

Is there a database with onshore wind production for the wind farms in Portugal?

I am looking to predict some production for future onshore wind energy production in Portugal, is there any database with info of performances of the existing wind farms in the country? something...

28 July 2024 1,750 1 View

(treating astrocytes with LPS) Has anyone observed the recovery of astrocytes from LPS injury, a few hours after the treatment?

or can you recommend articles showing the differential effect of LPS in a time dependant manner?

28 July 2024 2,547 1 View

HAs anyone used TGA to find activation enegy of water evaporation?

I have different polymer solutions and I hypothesize that water molecules are retained based on the water-polymer interactions, so the amount of free water is less to intercat with drug tablet....

28 July 2024 9,545 6 View

Can we eliminate the stress singularity at the tip of the crack by manipulating the elastic constants?

The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.

25 July 2024 9,976 3 View