Is there a way to aggregate an existing relationship between two sub-nodes to higher level nodes? For example, let us say you have "code 1" with an underlying "sub-code 1" and "code 2" with an underlying "sub-code 2". Then, you define a relationship beween "sub-code 1" and "sub-code 2". But now you dicide to view this same relationship as one existing between "code 1" and "code 2".
Any idea if this is possible in a non-manual duplicating way (as I will be having thousands of relationships)?
Thanks in anticipaton for sharing the expertise!
Best,
Joaquim Soares
For those following, here is the reply from NVIVO:
Hi Joaquim,
Thank you for your reply.
A relationship is a special type of code that defines the connection between two project items. If you have defined a relationship "sub-code 1" and "sub-code 2", you will not be able to aggregate that to the parent node. Unfortunately, relationships cannot be extended to the parent nodes by turning on a setting or using a feature.
I hope this helps. Regards,
(Redacted)
So the short answer is NO :-(
Thank you Joaquim Soares for the good question including the practical answer. Great.
Kind Regards,