I want to convert an SBS into nano-particle, the samples are either in powder or porous pellet. what are the process ?
I do not have basic experience in nano technology.
May be try spray drying of SBS dilute solution followed by ultrasaund dispergation.
Dispergation of powder after deep cooling.
From a practical point of view, I think it is NOT possible.
I am looking for asphalt testing laboratory to conduct SuperPave test. The test is on Binder alone.
09 October 2018 5,939 2 View
I am running a simulation which requires large data from soil compaction, the time frame does not allow for test methods. since the research is a simulation base, literature data could be applied.
05 June 2018 9,241 3 View
I am looking for affordable asphalt binder laboratory to allow me complete my PhD. Test methods are consistency test, short and long term ageing, viscosity, DSR, BBR and Low or high shear mixer.
04 May 2018 9,341 7 View
for samples such cement compounds, how can I determine their average molecular weight.
03 April 2018 768 1 View
I need a particular with different molecular weight. For example SBS in 2 , 5, 10, 30, 50, 80, 120, 200 kDa.
02 March 2018 7,400 3 View
I am having difficulty getting Polymer of a particular molecular weight from polymer suppliers. I am not a chemist but civil engineer and do not have much theoretical background of polymer...
02 March 2018 8,351 4 View
In most research works, the word parametric analysis have been used for correlation between two variables. Whereas the variables could have failed in test of normality and homogeneity, can it also...
11 December 2017 1,229 5 View
I could not perform sensitivity analysis for a nonlinear regression problem in Simulink, I am looking alternative programme that can perform sensitivity analysis of input variables. On the other...
08 September 2017 5,890 1 View
After training the Network, I want to know behavior of each input variables in the network.
01 February 2017 4,015 0 View
I have a research work to evaluate effect of UV on polymer modified asphalt blended with anti-oxidant.
10 November 2016 5,559 2 View
effect of double bond on the flexibility of polymers
07 April 2021 0 0 View
I am writing to request some information for making polymer color flakes. I would appreciate the help.
17 March 2021 0 0 View
Hi. Please tell me what guidelines should i need to follow for questionaries' type research work in India. It is not hospital based work, we are conduction basic institutional based qualitative...
03 March 2021 2,037 3 View
I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...
03 March 2021 7,540 4 View
The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...
03 March 2021 5,857 3 View
The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...
03 March 2021 4,107 4 View
Hello all, I'm currently working on my undergraduate thesis and I'm having difficulties trying to access KLD Stats and Sustainalytics because my campus Airlangga University and apparently other...
02 March 2021 8,525 1 View
Hi everyone, I'm studying Marketing and I would like to write my PhD thesis on the topic of pricing. Any specific ideas?
02 March 2021 9,706 5 View
02 March 2021 3,060 3 View
02 March 2021 932 1 View