I have tried to calculate/estimate the average pore size using DFT-model asuming slit formed pores. I am using the ASAP 2020 instrument but the instrument only gives me the total volume of the pores in specific pore width range. For example 1,5-300nm, the pore volume is 0,432 cm3/g. So how can I calculate what is the average pore width in this range?
Is it possible to calculate it from raw data obtained with DFT-model using incremental pore volume vs pore width?
In my laboratory , i don't have Instrument to measure pore width . But my granulated mix containing cryogel sample is very light and floating at the surface .Is there any process to measure for retention time . How the is curve will come after column methods ?
Think there will be problems, especially when pores are slit-formed, what are the ratios with/length of the pores?
Toni Varila If you can upload the raw isotherm data, I can calculate the PSD for you using QSDFT especially developed for carbons.
- Badges
- Science topic
- Similar topics
- Instrumentation Engineering
- Instruments