Is it technically viable to employ small wind turbines to generate electricity that could, in turn, power larger turbines? If such a setup were implemented, what would be the effect on overall efficiency? Would the efficiency of the larger turbines increase or decrease as a result? Additionally, it would be valuable to ascertain whether any previous studies or practical applications have explored this concept and documented their findings.
In terms of overall efficiency, it is unlikely that the efficiency of the larger turbines would increase as a result of being powered by smaller turbines. In fact, due to additional electrical conversion processes and potential losses in transmission, there might be a decrease in overall efficiency compared to a direct connection to a power source.
Using small wind turbines to generate electricity to power larger turbines is an interesting concept, but it may not be practically viable or efficient for several reasons:
Instead, the focus in wind energy development is typically on maximizing the efficiency of larger wind turbines through advanced technology, improved design, and better siting to capture the available wind resources effectively.
While I couldn't find any specific studies or practical applications that explore the concept of using small wind turbines to power larger turbines, it's possible that some research has been conducted. However, the lack of widely adopted implementations suggests that the concept may not be considered a feasible approach in the field of wind energy.
In summary, while the idea of using small wind turbines to power larger turbines may seem intriguing, it is unlikely to be a practical or efficient solution. The emphasis in wind energy development remains on optimizing the performance and efficiency of large-scale turbines directly connected to the grid to generate clean and renewable electricity.
Yes, small wind turbines may increase the total power, but it is not viable due to the below reasons.
a. O&M the cost of small wind turbines.
b. Regulatory requirements (maybe in some countries). The regulator has specified wind power plant capacity and doesn't allow the operator.
c. complexity and different engineering designs of large and small wind turbines.
d. Large wind turbines are installed in wind corridors for industrial purposes/ large scale and combining small wind turbines with the system may complex the system and require expertise.
There are other reasons, but these are common as per the prudent processes.
- Badges
- Science topic
- Similar topics
- Correction