Is it advisable to measure axial load on a shaft by mounting strain gauge on its circumference?

12 December 2015 0 5K Report

What are the constraints while mounting strain gauge on the circumference of circular shafts for measuring axial load? Any other preferred method?

Badges
Science topic

Similar topics
Psychometrics
Measurement

More Pankaj Dhaka's questions See All

How can I fix the following error in Abaqus?

"THREE FACTORIZATIONS IN A ROW FAILED. CHECK THE MODEL. IT IS POSSIBLE THAT THE MODEL CONTAINS THE KINEMATIC COUPLING DEFINITION SET UP IN A WAY THAT A DEGREE OF FREEDOM HAS NEITHER MASS NOR...

31 December 2015 8,226 14 View

How are displacement and load boundary conditions different in context to contact analysis?

Mostly Abaqus gives error "Too many attempts made for this increment" while solving contact problem using load boundary condition.

09 October 2015 4,775 11 View

How does assigning of beam orientation in Abaqus works?

I am facing problem in assigning beam orientation in case of a 3D space frame.

09 October 2014 7,914 0 View

How does one derive the standard deviation of a scale?

Dear all, I am working on analyzing data from a survey on student satisfaction. The survey contains items with a 7-point Likert response format that produce 12 scales related to different areas...

05 August 2024 2,141 4 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

Why specific capacitance is not proportional with the specific surface area?

Dear researchers, Why specific capacitance is not proportional to the specific surface area? I have material A with a surface area higher than material B, but material B is showing little bit...

26 July 2024 9,156 2 View

Can we eliminate the stress singularity at the tip of the crack by manipulating the elastic constants?

The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.

25 July 2024 9,976 3 View

Can I use CCCP instead of H₂O₂ as a positive control for ROS measurement through flow cytometry?

I am giving starvation stress to the soil amoeba (Dictyostelium discoideum) cells in my study groups and using NAC as a negative control. I am using DHE for ROS measurement.

20 July 2024 6,354 0 View

What is the correlation between IQ and job performance (measured by annual salary)?

I am struggling to attain multiple research articles, so far, I have looked at the Swedish longitudinal study, they have good depth and reliability. I was thinking of looking into twin studies to...

15 July 2024 3,737 1 View

How can I Resolve descrepancy b.t drop test simulation and experimental test?

Dear researchers; I am about to simulation a drop test that a 4kg ball drops a from500cm height on my sample. In my experimental test, our sample doesn't damage anymore. but when I simulate it in...

28 June 2024 9,925 6 View

Please let me know where I can study the scaling effects of experimental studies on soil slopes in geotechnical engineering?

I am looking to simulate real-world landslides in a laboratory setting and measure parameters such as volumetric water content, pore water pressure development, seepage patterns, and ground...

23 June 2024 8,340 2 View

What is the difference between creep deformation and stress relaxation ?

I understand the basic definition for both. I found a literature to describe both of them. In the paper, they states: If a stress is applied to a concrete body, the body experiences an elastic...

19 June 2024 525 3 View

Difference between creep deformation and stress relaxation deformation ?

I understand the basic definitions of creep and pressure relaxation. However, I am confused about the exact difference between them. See attached photo. Because a compression force is applied,...

17 June 2024 5,344 2 View