Does using a reactor made of acrylic sheets beneficial for microalgae anaerobic digestion?
Hi Sabid.
We use both kinds on our laboratory (acrylic and glass) and they both for your purpouse. But the glass reactor can be sterilized and the acrylic one will last for three/four years tops. There is also a higher chance of gas leakage using the acrylic.
Thanks @Giovana
Instead of checking only the mRNA level, I want to check the active protein level of MMP-1 in Liver tissue from mice. How can I do that?
03 March 2021 1,763 2 View
Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...
02 March 2021 1,999 5 View
I am working with the Credit card dataset. I am aware of the fact that the Banks and financial institutions do not share the dataset with third-party companies or researchers. I just need to know...
18 February 2021 9,186 3 View
I have a database of experiment .csv files. how to extract the feature from this .CSV file with max-min normalization? I need a matrix(with values between 0 to 255) to be converted to a grayscale...
04 February 2021 7,773 3 View
I'm using OpenFOAM to run a CFD study of thermal comfort within a hall. I'm using OpenFOAM v1912 and BouyantBoussinesq(Simple&Pimple)Foam solver. eI have 6 inlets and outlets each with specific...
21 December 2020 1,303 3 View
I need to define the microstructure of inconel 800, but I cannot find any literature related to it. Literature is about incoloy 800 mostly which is a bit different. Can anyone tell me if there...
07 December 2020 3,137 3 View
Because of GDPR and confidentiality issues, no bank will expose the user's data to third-party researchers, and hence we cannot train our model for real-time fraud detection with real data (What I...
01 November 2020 6,063 3 View
Which parameters should I employ for nano creep testing of Titanium and Inconel alloys? Should I load it with a constant load rate or strain rate? What should be the maximum load? What should be...
29 October 2020 5,727 4 View
I was studying the biological treatment (anaerobic) of wastewater biomass. I found that anaerobic bacteria take a comparatively longer time to biodegrade nitrogenous compounds. Is there any other...
28 October 2020 921 3 View
I was looking for a formula to calculated the obtained energy yield via biohydrogen and biomethane production using anaerobic digestion process. The unit is in SI unit (x) mLH2/g VS and (y) mL...
20 October 2020 8,668 5 View
When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...
03 March 2021 4,892 5 View
I'm a graduate student who works with an anaerobe, so I often work in an anaerobic chamber. I've been working on an assay that involves the steady-state of the quinone/ quinol pool. Anoxic...
03 March 2021 2,971 1 View
I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...
01 March 2021 395 3 View
Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !
01 March 2021 2,501 3 View
Anyone know the amount of protein before enzymatic digestion for phosphopeptides enrichment of serume sample in Ti-IMAC? Has anyone ever use Ti-IMAC(the material is from Chinese company named...
28 February 2021 7,310 3 View
I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...
27 February 2021 6,801 3 View
Hi everyone How to model Supercritical water gasification (SCWG) process in Homer software?
25 February 2021 4,075 1 View
Hello I'm currently working on a topic related to studying the anaerobic biodegradation of TPH in marine sediments. In this work, sediment should be mixed with fuel oil to a concentration of 20 g...
24 February 2021 9,839 3 View
I am trying to clone 2 copies of the same mammalian gene into the pSF-CMV-Ub-Puro Ascl (contains HindIII, KpnI and NheI cut sites) plasmid. This is what the final product is supposed to look like...
24 February 2021 6,310 3 View
I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium
24 February 2021 1,915 1 View