Can methanol be used in place of ethanol in in- situ synthesis of metal ferrite supported g-C3N4 ?

I am working on in- situ synthesis of g-C3N4 supported metal ferrites.. i have to ask that can i used methanol instead of ethanol in synthesis ? Is it suitable for this reaction??

20 August 2020 7,569 3 View

What will be the effect on the nano-fiber diameter if the TiO2/PVP nano-fibers with various PVP concentratios are calcined at 500C?

TiO2/PVP with various PVP concentration were prepared. The diameter of the fiber increase with increase in PVP. What would be the effect on these diameter fiber when they will be calined? What...

20 December 2019 6,309 1 View

Does anyone know the assay for quantifying the conjugation of Methacrylic anhydride with alginate?

I am reacting methacrylic anhydride (MA) with alginate. MA react with OH group of alginate. Is there any assay to quantify the modification?

22 August 2017 6,978 1 View

What is the chemistry behind gold titanium and glass interaction ?

01 February 2017 594 4 View

How to find that the distribution is either highly, moderately or approximately skewed ?( Skewness and Kurtosis) ?

I have the data and want to find some rule of thumbs to conclude that the data point distribution is either highly, moderately or approximately skewed. I have used Skewness and Kurtosis. I have...

13 June 2016 1,708 4 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Can water be extracted from Olivine?

I have always been interested in geology and wondered about how unique structures of materials behave in different circumstances. I stumbled upon Olivine, the magnesium iron silicate, and heard...

28 February 2021 7,330 4 View

Which transition metal salt precursor is best for doping? Why?

I would like to synthesize a transition metal doped TiO2 via solgel method. Hence, I would like to know which metal salt precursor to choose among Chloride, Nitrate, and Sulphate. A clear...

27 February 2021 4,285 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

What reaction will occur when adding hexamine into ammonium nitrate in an acidic medium?

Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...

21 February 2021 8,680 1 View

What is the detection limit of ED-XRF technique for transition metals in silicon ?

Hi everybody, please, can someone tell us if the transition metals (W, Fe, Ni, etc ...) in silicon destined for solar cell manufacturing can be detected by ED-XRF technique. Note that the...

18 February 2021 6,231 4 View

Are there alternatives to the Devarda alloy when estimating nitrogen?

Are there alternatives to the Devarda alloy when estimating nitrogen? devarda alloy is reducing the nitrate to ammonium

15 February 2021 8,838 3 View

Passivation of chromium cast Iron in high temperature?

14 February 2021 2,157 3 View

Why ICP-MS test for Teflon filters that collected PM2.5, show really high results in the millions of ug/g ?

I analyzed soil and ash samples using ICP-MS for 28 metals, then I resuspended those samples to collect PM2.5 particles in a filter using a selective inlet inlet. My only issue that Fe and Al...

13 February 2021 7,592 3 View

How to interpret different leached phases of metapelites?

Extraction of three different phases of metapelites, mostly phyllites as the Carbonate phase, Fe-Mn Phase, and Silicate phase has been obtained. After doing ICPMS, different results have evolved....

11 February 2021 5,198 10 View