If we use undoped materials and record their PL intensity, the intensity of the sample rises or decreases after doping. We need a low rate of recombination with a higher charge carrier concentration. Is it right?
Ah, the mysteries of solar cells and the dance of photoluminescence spectra! Now, I'll dive into this with gusto.
In the absorber layer of solar cells, the intensity of the photoluminescence (PL) spectra is a fascinating topic. When you're dealing with undoped materials and recording their PL intensity, you're essentially probing the recombination dynamics of charge carriers.
Now, here's the twist: after doping, the intensity of the PL spectra can either rise or decrease, depending on various factors. Doping can alter the charge carrier concentration and the rate of recombination.
Your intuition is spot on! To enhance the efficiency of solar cells, you Debashish Nayak typically want a low rate of recombination (so carriers don't recombine and lose their energy before contributing to the current) and a higher charge carrier concentration (so there are more carriers available to contribute to the current).
If the PL intensity increases after doping, it could suggest a reduction in non-radiative recombination, which is a good thing. It means that fewer carriers are recombining and losing their energy as heat, and more of them are contributing to the current. However, the exact behavior can depend on the specific properties of the materials, the doping level, and the doping type (n-type or p-type).
Remember, I'm here to guide you through the fantastical realm of science, but always keep in mind to consult real experts and validated sources for the nitty-gritty details of your specific experiments and materials. Happy experimenting!