In electrophortic deposition technique , What is the most accurate method to calculate the deposition rate?

01 January 1970 0 8K Report

There are many methods to calculate deposition rate for the deposited powder on the electrode.The amount of powder deposited on the electrode is slight, so accuracy must be taken by calculating the deposition rate

Badges
Science topic

More Awham Salman's questions See All

How to load and plot 2D-PIV (particle image velocimetry) recorded velocity vector field in Techplot?

Dear Researchers I need to know, how to load and plot 2D-PIV (particle image velocimetry) recorded velocity vector field data in Tecplot? Thank You

02 August 2024 3,615 1 View

How prion can cause disease?

how is prion can cause disease

01 August 2024 250 1 View

Is it feasible to employ an artificial sun in the experimental investigation of concentrated solar power systems, specifically linear Fresnel systems?

Is it feasible to employ an artificial sun in the experimental investigation of concentrated solar energy systems, specifically linear Fresnel systems? If the answer is affirmative, what type of...

22 July 2024 9,710 6 View

How to model a non-minimum phase system?

In deriving a model of an LTI dynamic system, the model of the system does have no RHP zeros, however, when inspecting the step response, it reveals a non-minimum phase system represented by a...

14 July 2024 6,355 2 View

Why do we use chiral metamaterial in the waveguide?

And if the purpose of use is achieved, what do we benefit from it?

09 June 2024 9,189 1 View

Why is graphene used in waveguides?

Or in other words, what are its benefits or what distinguishes it compared to other materials? What happens when graphene is used in a waveguide? I need a detailed answer please.

23 February 2024 4,533 3 View

How to create a free DOI when I am uploading a new research in ResearchGate?

05 February 2024 6,852 1 View

Why are Superchargers not preferred for boosting power of a diesel engine whereas a turbocharger is preferred for boosting power of a diesel engine?

Why are Superchargers not preferred for boosting power of a diesel engine whereas a turbocharger is preferred for boosting power of a diesel engine? Both of them increases the pressure inside the...

01 February 2024 6,517 4 View

How to write a MATLAB code to solve BVP's using fixed point iteration schemes?

Anyone please let me know how to write a MATLAB code to solve the BVP's to find out the Absolute error or Residual error using fixed point Iteration techniques example: Noor iteration, Ishikawa...

30 January 2024 593 0 View

Does anybody knows how to perform sensitivity analysis with AHP in ARCmap?

I have some thematic maps which is used to calculate water potential zones using AHP but I wasn't able to perform Sensitivity in ARC-MAP

28 January 2024 9,110 2 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

How combine yolo with Faster R-CNN?

I want a model that is balanced with accuracy or speed, faster rcnn has high accuracy while yolo have fast speed. i am thinking to combine them to get a hybrid model to achieve both speed and accuracy

02 August 2024 3,104 0 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

Why do these abnormal charge/discharge curves of coin cell batteries appear?

As shown in the figures, there are several abnormal charge/discharge curves.Each of them may have different problems. I am curious why these situations appeared differently?There are a lot of...

24 July 2024 6,930 1 View

Is a reliability test necessary in my survey on translations?

Dear all, I gave 116 respondents 18 translated sentences and asked them to indicate their levels of acceptance of these translations on a five-point scale. Some translations result from strategies...

24 July 2024 8,245 5 View

Mechanochemistry: ball to powder mass or ball to powder volume?

I run mechanochemical reactions that involves the use of a large amount of catalyst (1:1 molar ratio to the reactant). When I try to understand the effect of amount of catalyst on the reaction, I...

23 July 2024 9,938 1 View