I am going to start my master's thesis. I need experts opinion on biopolymers which can be used for the marine foods, especially to high fat containing fishes.
Thanks and Regards
You may try guargum, chitin and fatty acid sugar esters as edible coating and hopefully you will get better results
I'm involved in ethanol production from ligno-celluloic waste through fermentation. I need a colorimetric method to monitor the ethanol production since the costlier GC is not available.
07 August 2012 8,101 10 View
What is the mechanism of action of lipase on triglycerides? I mean which fatty acid will be cleaved first, which one will be next, no need to explain about catalytic triad and its hydrolytic...
02 March 2012 8,991 0 View
Can enzyme with size of 40k Da immobilize in nano particles ?
01 February 2012 9,703 7 View
Can FTIR detect glycerol in the sample? I want to analyse biodiesel sample, but glycerol does not separated in my sample, i want to know whether methyl ester only can be detected or glycerol will...
31 December 2011 2,876 15 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
"I have treated adult zebrafish with 8-micron polystyrene microplastic and want to study the bioaccumulation in different organs. Can this be done using hydrogen peroxide digestion followed by...
05 August 2024 853 3 View
How does the atmosphere affect the flow of matter and energy on Earth and flow of energy in the biosphere related to the flow of food through a food chain?
02 August 2024 9,644 0 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose
25 July 2024 438 3 View
I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...
23 July 2024 4,074 2 View
What is climate resilience for food security and sustainable agriculture and how is smart irrigation in agriculture climate resilient?
22 July 2024 1,947 0 View
In the aquaculture and fish nutrition research field, a number of growth and somatic indexes are often used, including specific growth rate (SGR), feed conversion rate (FCR), protein efficiency...
22 July 2024 2,480 4 View