I bought a new bottle of Bisphenol A-glycidyl methacrylate (BisGMA) however I found that it is solidified inside. how to make it fluidly again?

More Ahmed Samir Bakry's questions See All

I have get this error when i calculated the geometrical optimization for prco3, it takes 12 hours until gives this message in the outputfile?

Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...

09 August 2024 7,615 1 View

Why Do TDS and EC Increase with Larger Wastewater Volumes, While BOD and COD Decrease?

I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...

09 August 2024 9,621 0 View

Can we mark 'EFL Learners shifting from general digital to AI technologies' as technological transition?

After COVID-19 it has seen that EFL learners technological affiliation has raised. In addition, in the post-COVID period learners started to engage AI technologies like ChatGPT while learning...

08 August 2024 8,964 4 View

How to generate a citation of my paper from ResearchGate?

How we can cite the papers from ResearchGate. I am trying to create citations for this article, Quantum Machine Learning Algorithms for Optimization Problems: Theory, Implementation, and...

08 August 2024 6,690 3 View

Does Anyone have expertise in in vitro transcription and RNA pull down assay?

I am currently working on LncRNA; to know the lncRNA-protein interactions I want to do RNA pull down assay, so I need to design primers with T7 promoter. I need assistance in this regard.

07 August 2024 6,622 1 View

How to fix background error in rietveld refinement of one XRD peak using GSAS-II?

I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II

05 August 2024 5,291 2 View

How can I add own Henry coefficients in Aspen Plus?

Hi, i would like to simulate an absorption process in Aspen Plus. I want to use the NRTL model und would like to add some individual Henry coefficients. Is that possible and how?

05 August 2024 2,333 2 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

Can usage of AI tools like chat GPT in research work is recommendable ?

AI tools like ChatGPT can enhance research work significantly when used responsibly and in conjunction with thorough human oversight.

05 August 2024 1,842 3 View

How to set the environment variable for incorporating the GD3 dispersion in G16 for performing calculations using the OPBE functional?

I have incorporated the dispersion effect for the OPBE functional by specifying the S6, SR6 and S8 parameters for GD3 in Gaussian G09 package. For this purpose, I have defined the environment...

05 August 2024 1,494 2 View

Does crude extraction using NaOH and Tris work well with Fungi?

I'm trying to find a DNA extraction method for fungi that does not require equipment and heating. Is there anyone who can suggest an alternative option? Thank you

08 August 2024 4,733 2 View

How to resolve ‘[ atomtypes ] Invalid order for directive atomtypes’ error in Gromacs?

I have been using Gromacs 2021.7. I wanted to simulate two small molecules in water. But, while generating the ions.tpr, I am getting the following error. The topol.top and .itp files for each...

17 July 2024 9,897 4 View

Not able to give GAFF forcefield to my ligand?

I have been able to assign the CHARMM forcefield to my ligand i.e. acetyl coenzyme A but not the amber forcefield. I want to run amber forcefield and the parameterization of ligand is failing. I...

15 July 2024 7,323 1 View

How to improve my plaque assay for influenza virus?

I used MDCK cells for my plaque assay for influenza virus and seeded 950,000cells/well in 6-well two days before infection. The virus was diluted in FBS-free MEM with 0.5ug/ml TPCK-trypsin. Here...

11 July 2024 5,669 5 View

What is alternative for PMMA?

If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...

03 July 2024 2,371 1 View

To prepare polymethyl methacrylate polymer for the study of acoustic properties without of bubbles during this process, what measures should be taken?

To prepare polymethyl methacrylate polymer for the study of acoustic properties, a mixture of methyl methacrylate monomer and benzoyl peroxide is used. This mixture is then heated and placed on a...

27 June 2024 2,087 1 View

How to reduce the material coming out of the torque rheometer?

A physical mix was in vitro evaluated on a torque rheometer. The composition was predominantly recycled polypropylene (PP), yet the melt flow index (MFI) was found to be excessively high....

25 June 2024 10,154 0 View

What is the best way to synthesize cDNA of miRNA; using poly A kit or stem loop PCR?

Recently, I have been trying to quantify the expression of miRNA. I have extracted the miRNA. However, I am not clear about using the cDNA synthesis kit usually there are two kits providing by...

16 June 2024 9,723 2 View

How to functionalise the surface of a PMMA microparticle with amines?

I have porous PMMA microparticles up to 1mm in diameter. I would like to functionalise the surface with amines whilst keeping the particles intact. Chat GTP has recommended ethanolamine or ATPES...

13 June 2024 7,977 1 View

How is it possible to model a protein that consists of several subunits using a Modeller?

Good day, I am trying to model the GABA A receptor, with different subunits. I selected the templates with the highest percent of identity, but as a result of the modeling I got a protein with...

02 June 2024 5,489 2 View

Gary Joseph Ordog

Solvents can dissolve it, acetone is probably the best one. But, if you are trying to use it after it has been polymerized, probably not a good idea.

Ahmed Samir Bakry

Dr Gary

Do you think it is already polymerized?

when placing small amounts of the solidified material in warm water it is changing to the liquid form.