I am using FullProf for estimation of phase percentage of mixed ferrites. How can I get it?

05 May 2018 0 5K Report

From XRD data using Full prof I want to know phase percentage the program is running successfully, but somehow I am unable to get the phase percent details. How can I get it?

Badges
Science method

More Bhavana Joshi's questions See All

What is Bragg's law in two dimension and one dimension?

I came across above terms while teaching. I think 2dsin(theta)=n(lamda) is Bragg's law in two dimension. Could you please correct me and tell me what is meaning of Bragg's law in one dimension mean?

31 December 2018 6,411 0 View

After decaping the cell and washing with dimethyl carbonate (DMC) how to dry the electrolyte? and why white layer is formed on top of electrode?

I washed the Fe based electrode with DMC after decaping the cell. I kept electrode soaked in some DMC and kept it for drying like that. After evaporation of DMC I find some white layer on the...

04 May 2016 8,894 2 View

What is the transparency of Graphene monolayers?

In order to study the optical properties.

08 September 2014 1,806 2 View

How can carbon in graphene assemble itself in hexagonal form?

I am learning about graphene and graphite formation.

08 September 2014 7,884 5 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

How to fix background error in rietveld refinement of one XRD peak using GSAS-II?

I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II

05 August 2024 5,291 2 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

Hello, regarding Mxene 2D titanium carbide?

I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.

02 August 2024 6,789 4 View

Why Powder XRD is performed after cruhsing a crystal if Single Crystal XRD analysis of the same crystal has been performed already ?

What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?

30 July 2024 6,261 4 View

Can anyone guide me the best method to analyze the XRD data???

I will be doing an XRD on a sample which is powdered in natured and is a hydrogenated compound. I would like to know how we can understand the individual components and components by using the...

28 July 2024 4,548 2 View

How to saturate steel samples with hydrogen?

I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...

24 July 2024 4,393 2 View

Guidance needed for preparing the hydrogel samples for the XRD instrument?

I'm working with a hydrogel sample and I'd like to perform XRD analysis. Can anyone offer guidance on preparing the hydrogel for the XRD instrument? Specifically, I'm unsure about the best method...

20 July 2024 3,611 4 View

How to decide whether the refinement is correct or not, based on Rwp and Rexp factors by Fullprof?

One of the papers I read by Toby, where (title of the paper was "R factors in Rietveld analysis: How good is good enough?"), he tells us that to get good chi square value, you must have low Rwp,...

17 July 2024 9,668 4 View