I am using CFD Fluent Version 14, I have a problem with compiler so as to include UDF files, using C++ Microsoft Version 6 to write can advise please?

How to code open-ended questions in SPSS?

Hello all, In SPSS I am going to code 2 open-ended questions. I have already read all the answers and I made a list of the most important categories to which I can code the answers. This question...

02 March 2021 1,757 4 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

How to eliminate Steady state error from Reinforcement learning genetic algorithm code?

The following code (see 1st 2 images attached) is used to produce PID controller values that are designed to control the system (G). The code finds the PID controller values (noted as k) by using...

28 February 2021 6,560 14 View

How can we simulate an hyperelastic-viscoelastic behavor with Ansys APDL?

I am working on modeling and simulation of biomecanical material behaviour, I have succeded on simulating skin using anisotropic hyperelastic material, on APDL and in our lab's finite element...

28 February 2021 552 3 View

How to approach CFD simulation results of a flow past a cylinder?

Hi all, I'm doing a transient simulation of flow past a rectangular cylinder close to the free surface. As far as I'm concerned, the common practice is to discard the initial stages of the...

25 February 2021 1,348 3 View

Chris Zhong

win7+fluent14.0+microsoft visual studio 2010. This should work well.

Tushar Patil

Downloading and Installing Microsoft Visual Studio 2015

Download and Install Microsoft Visual Studio 2015 Express for Desktop

https://www.visualstudio.com/products/mt238358

NOTE: The executable for the Express Edition would be wdexpress_full.exe. The Community

Edition, vs_community.exe, will not work.

Open up VS2015 x86 x64 Cross Tools Command Prompt window and change to your shared,

mapped network drive letter

Drag the ANSYS Fluent shortcut into the VS2015 x86 x64 Cross Tools Command Prompt window.

This will work for all versions of Fluent older than v17.0

Arthur Mngoma Omari

Thank you all for your advice. I run the compiler it gives me error of with this not 'nmake' is not recognized as an internal or external command,

operable program or batch file', how do I remove it.

Hope this file will help....but this is for VS2010, for latest versions help, please contact local Ansys support....still I believe with your versions, this will suffice

Thank you Mr Tushar Patil, Received