I have genotype gvcf of 30GB , which is causing an issue in analysis. I was wondering if there is a way to get around the size issue ?

I have a genotype gvcf of significant size, which is causing an issue in analysis. I was wondering if there is a way to get around the size issue and run the genotype gvcf in R or do I need to...

09 February 2021 4,178 4 View

Can anybody please give me idea about the complete procedure to estimate state of charge of the battery through hardware setup?

I am working on SOC estimation of battery for EV's, I want to extract the real battery data through the experiments on battery, so i want to know what exactly the equipment's i need to perform the...

22 January 2021 8,216 2 View

Column chromatography. Problems with pH - why?

What if in column chromatography with solution (neutral pH) acidic pH is observed and remains along the whole process? What went wrong and what to do with this?

10 April 2020 5,587 4 View

CFD in Fluent: Modeling Pipe with Artificial Roughness. How do I choose proper turbulence model and mesh properities?

I'm currently working on a research of thermal-hydraulic performance of artificially roughened pipes using Ansys Fluent. I have a 2D model of pipe section (upper boundary is wall with rectangular...

24 March 2020 623 3 View

What algorithm or program is better to use in case of stitching .las files from different sources?

For example i use Leica RTC360 scanner for terrestrial data acquisition and i like to perform a stitching with point cloud gathered from UAV photos (not lidar). What is the best way to do so? I am...

03 March 2020 9,471 3 View

Can the Thermo TriTrack dye give me a reading at 473 nm on a fluoresence plate reader?

I am getting a background dye reading at 473nm. Does this dye give a reading only under UV or is getting this background reading normal?

24 February 2020 9,426 1 View

While doing the surface sterilisation of roots and stems of ferns, there is a growth in the final wash i.e. control. May i know the reason behind it ?

Sodium hypochloride and Ethanol have been used for surface sterilisation. May I know any alternate methods for surface sterilisation?...

05 January 2020 9,237 2 View

How does one analyse the likert scale in the most simple way possible?

I am an undergraduate student currently working on a group mini-dissertation. (forgive me for the rudimentary knowledge I have) We're studying the co-relation between peoples' attitudes toward the...

27 August 2019 7,734 2 View

How to implement physical layer attack detection for cognitive Radio Network in Matlab/simulink?

Hello, I have started my research work in the area of cognitive radio networks. Initially I am looking to design a CRN environment in Matlab. Please help me with the initial requirements required...

06 February 2019 2,145 3 View

How to run a global minimum search in GMIN?

Dear colleagues, I am trying to search for boron-aluminum clusters global minima using GMIN code developed by Wales group. Could anyone help me please with the input file? If there are...

29 October 2018 6,686 1 View

No title

03 March 2021 5,360 2 View

How the wettability of rock sample can be changed by ageing in pure hydrocarbon oils only?

I want to do wettability analysis of hydrocarbon oil (octane)/rock/surfactant solution system. but to do the analysis first I have to make rock surface oil-wet. Since hydrocarbon oil does not have...

27 February 2021 5,383 3 View

What is the suitable range of Sulfur content and Viscosity of Heavy fluid Oil that used in Kiln?

What is the disadvantages of high sulfur content to the ceramic burning process? and what is the effect of outranged viscosity?

24 February 2021 8,219 2 View

How can Gamma Ray API units be converted to CPS (counts per second)?

Oil and gas companies run gamma ray tool and take readings in API units while Gamma ray is also noted in cps, so how these units can be converted into each other?

24 February 2021 7,545 2 View

How to remove compound ( Europium complex ) from paraffin oil?

How can I remove my compound from paraffin oil? Mistakenly my compound fell in an oil. Compound = Europium complex

22 February 2021 5,667 2 View

How the values of errors can be calculated for thermodynamic data?

I have calculated thermodynamic parameters for surfactant solutions in aqueous and mixed alcoholic solvents. I want to calculate the value of errors in the data and represent it in the table along...

22 February 2021 239 2 View

When I mix oil and NaOH solution, Why solid layer in the surface is formed?

During my trial for lubricant oil re-refinery process, I use NaOH as coagulant agent. After overnight of gravity settling, a solid layer in the surface was form. what product is that? since the...

22 February 2021 2,116 4 View

The type of filter paper used to filter an epoxidized oil (the mixture is an epoxidized oil with magnesium sulfate) ?

I have a mixture of epoxidized oil and magnesium sulfate wich type of filtre paper should i use

21 February 2021 3,944 3 View

What reaction will occur when adding hexamine into ammonium nitrate in an acidic medium?

Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...

21 February 2021 8,680 1 View

How can we study the adsorption efficiency of microgel at the oil-water interface?

I am studing the mircogel at oil-water interface. I want to know the adsorb amount of microgel at the oil water interface. How we can determine this amount?. I will highly appreciate your...

19 February 2021 2,787 1 View