How to synthesize metal metal nano-alloy in chemical solution method or low temperature method?

02 February 2015 1 7K Report

Using sodium borohydride as reducing agent.

Hi,

Using sodium borohydride as reducing agent one can prepare metal-metal nano-alloy as follows. Two metal salt solutions is mixed in a round bottom flask. The flask is covered with black cloth to prevent photochemical reaction. Then reduction reaction is carried out in the presence of nitrogen in order to prevent the oxidation of metal during the reaction process.

Badges
Science topic

More Susanta Saha's questions See All

I want to know the literature about the synthesis of nano alloys from layered double hydroxides.

How to prepare Ni-Fe and Ni-Co nano alloys from LDH?

05 June 2016 7,762 1 View

Can you please give some reference on the synthesis of metal-metal oxide nanoparticles?

May be sol-gel method.

09 October 2014 7,760 2 View

Why nanomaterials have different properties with respect to bulk?

One reason may be the higer surface area.

07 August 2014 2,381 0 View

Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

How to determine solutionizing time for cast Al alloys?

For wrought alloys soaking time at solutionizing temperature is determined by thickness .Do we have such standards for cast Al alloys

23 February 2021 8,839 3 View

Which thermal conductivity test recommended for Ag-Cu nanofluid?

I have prepared Ag-Cu alloy with polymer coating upon it.... how can I measure thermal conductivity of it ?

22 February 2021 5,915 3 View

How to generate AA6061 alloy or any aluminium alloy crystal in material studio?

I need to carry out molecular dynamics simulation on Aluminium alloy. For this i need the crystal structure that which could be further replicated to form a structure.

22 February 2021 1,410 1 View

What is the best etching method for Mg-Ca alloy?

I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?

21 February 2021 2,558 5 View

Could you please share your experience with me on the type of 96 wells plate for MIC determination: Treated Vs Untreated and Round-Vs Flat-bottomed?

I am working on the MIC determination of various antibacterial agents (both water-soluble and- insoluble) against S. aureus, MRSA, and S. pyogenes. Some guidelines recommend using round-bottomed...

17 February 2021 7,029 3 View

What are damage parameters for SMA while modelling on ABAQUS 2020?

I have given Elastic and Superelastic material properties, but I think we need to provide the damage parameters also. Please help me here.

16 February 2021 8,694 1 View

Are there alternatives to the Devarda alloy when estimating nitrogen?

Are there alternatives to the Devarda alloy when estimating nitrogen? devarda alloy is reducing the nitrate to ammonium

15 February 2021 8,838 3 View

Passivation of chromium cast Iron in high temperature?

14 February 2021 2,157 3 View