Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Experiment statistical analysis?

07 February 2021 3,635 3 View

Why Selenium nanoparticles synthesized by PEG 200 could not be scaled up ?

I could not synthesize Selenium nanoparticles by PEG 200 at up-scale ( more than 100 ml) as it got aggregated while at small amounts it works fine , I work with 850 PPM using selenium powder in...

08 January 2021 10,049 1 View

How to read forces from a file and apply them to a specified nodes in ANSYS APDL?

I want to apply different forces for every node. These force values are saved in .txt or .csv file. Can anybody help me to do that using APDL command. I attached Ansys input file for my model and...

15 November 2020 2,883 1 View

Which should be used for Anxiety : unselective beta blocker or B1 Blocker ?

which would be more effective in treatment or protection from Anxiety : unselective beta blocker as Propranolol or selective beta-1 adrenergic receptor antagonist as Bisoprolol ?

15 November 2020 7,994 2 View

How Abaqus can generate lumped mass matrix with non zero values only at the diagonal ?

Hi everybody I generated mass matrix by Abaqus, but it has nonzero off diagonal values. I need to get lumped mass matrix with nonzero values only at the diagonal. In Ansys I can turn Lump on...

28 October 2020 5,960 4 View

No title

I searched a lot for a generalized equation or an algorithm that can be implemented on MATLAB. However, all that I found still theoretical analysis. Can you help with the algorithm or the code for...

24 August 2020 8,117 7 View

How to know coationg efficiency of nanoparticles?

If I'm trying to coat ZnO nanoparticles with Silica, how to know how much of ZnO is coated? (coating efficiency)

29 July 2020 1,813 13 View

Extraction of CoA linked to Acyl chains?

I am in need for a protocol dedicated to the extraction of CoA-acyl chains from plant extracts.

17 May 2020 3,459 1 View

What are the alternatives for horizontal bracing system?

There is a steel pipe rack with normal framing system including horizontal and vertical bracing systems, all the connections of the horizontal bracing are defected, for some reasons it is nearly...

29 February 2020 1,583 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

No title

23 February 2021 4,014 3 View

How can misfit between business requirents and ERP system business process be reduced?

One main reason for failure of most ERP implementations is the misfit between business requirents and ERP system business process be reduced. How can the misfit between business requirents and ERP...

22 February 2021 5,709 5 View

How to perform Kaplan-meier survival analysis in SPSS?

Hi everyone, This is my first time of attempting to run survival analysis. I have a data on patients with End-stage Kidney Diseases (ESKD). I would want to run survival probability by treatment...

16 February 2021 2,647 3 View

Is ANSYS Fluent good for simulation of a three phase reactor(stusy of its hydrodynamics or mass transfer...)?

Hello everybody, I would like to simulate a three phase reactor and study its hydrodynamics. I would like to know which type of software is better? I have a good command of ANSYS Fluent and I am...

10 February 2021 4,303 3 View

Hello .Ineed a researchs about systolic heart failure any one can help me ?

Am a master student .I need an information about this case to write my thesis?

09 February 2021 9,706 2 View

Discrete solution , process hf3d error: Failure in solving matrix - how to solve this error in hfss?

a unit cell of metamaterial has to be analyzed in simulation using hfss. The solution frequency is 10 GHz and range is from 5 to 15 GHz with sweep and interpolating linear step method. Number of...

23 January 2021 2,566 4 View

Continuum Damage in ANSYS Workbench?

Hey, i basically want to simulate a tensile test to validate the damage model of my composite material. When using the instant stiffness reduction the results converge but are not sufficent....

12 January 2021 2,313 3 View

How to solve "Insufficient data specified to develop the failure surface for material 1" in ANSYS APDL?

I'm running a reinforced concrete beam analysis model, all the constraints and loads are set. all the steel material properties are set. I'm using SOLID65 for concrete elements, LINK180 for rebars...

09 January 2021 7,349 1 View

Why internal energy absorbed during impact is different when simulated with solid and shell elements using abaqus?

I am trying to simulate high velocity impact of rigid spherical projectile on a rectangular plate using Abaqus Dynamic Explicit. Particulars of Projectile Diameter : 12 mm Mass : 7.05g,...

04 January 2021 10,022 3 View