I am trying to print a microfluidic wax pattern on a custom size paper with xerox colorqube 8580 printer. I have set up the page size in the printer but I cannot set it up in the xerox driver or the software I am trying to print with. As a result I am getting the pattern printed at a shrank size. I don't find an option on the xerox driver software. How can I fix this problem? Thanks in advance.
What did you use software to drawn mold? I used a laser-printer to print a microfluidic paper, I also had a similar situation after that I used Inkscape to design and export it to png and print it. It is Ok! You can try it.
Ngo Bao Chan
I am currently using GIMP to draw the microfluidic channel and I tried converting it to pdf and jpg both before printing but it doesn't work out.
Touhid Bin Anwar
I hope you have solved your problem. If not, you can try AutoCAD to draw your devices. I have been using AutoCAD for couple of years and haven't had any problems.
Thanks for the suggestion. I am currently using GIMP software, but AutoCAD should be even better. I was basically stuck with the software problem and now it's solved.
Hi
You can choose the option of customed paper ahead of printing.
my suggestion is to find the software of another version, maybe older one.
and/or
change way to supply paper. As I remember there are two.
plus, you can export pattern images into .pdf that is easier to manage patterns and to change printing environment
Hope you solve it soon
- Badges
- Science topic