Which one is better for storing energy: Fuels synthesized from CO2 or Hydrogen?

Based on educated guesses, which one of the following promises a better future for storing energy for grid scale, automobiles etc as opposed to batteries: 1) Fuels synthesized form CO2 2)...

02 February 2021 8,741 6 View

How to Make a Pre-Emulsion of Methacrylic acid, Butyl Acrylate, and Acrylonitrile to use in emulsion polymerization ?

Any answer will be useful / Surfactants / Procedure I am using this pre-emulsion in sequential emulsion polymerization

14 January 2021 2,566 4 View

How much Ti and B (in ppm) is required for effective grain refinement and why?

To have the desired grain size in 6061 and 6063 Al alloy, what should be the minimum % of Ti and B pick up and what is the chemistry/metallurgy behind that?

07 January 2021 9,305 2 View

How to make AlV50% alloy by thermit route?

Kindly provide the technical papers/patents on the production of AlV50% alloy by thermit route, by using V2O5

05 January 2021 2,471 3 View

How to perform coupled field analysis in abaqus software?

Work is related to structural health monitoring through impedance signature variation.

28 December 2020 2,627 2 View

Apart from deoxidation what are the other applications of Ferro Aluminum (FeAl) and Al wire?

FeAl and Al wire has applications in Steel for deoxidation. I want to know the other application of various grades of FeAl. Does Al wire also has other applications apart from deoxidation? Regards

27 December 2020 8,435 1 View

Is there is any reference if someone is using Ti sponge cored wire instead of FeTi 70% cored wire for plain carbon steel?

There is a different behavior in carbon steel and stainless steel. Drastic low recovery in carbon steel due to high melting temp. But in ss , working temp is high so dissolve at 1668 degree temp....

16 December 2020 8,765 8 View

PRODRG server changes ligand coordinates after generating toplogy files?

I used ligand after docking and passed it to prodrg server to generate GROMOS topology files, although the files generated when analyzed were out of the binding site pocket. PRODRG changed the...

26 October 2020 1,420 3 View

I have a monoclonal antibodies (purified) of 8mg/ml, Now I want to evaluate ELISA for my serum samples in International ELISA UNITS?

I need to know how to convert micrograms of antibodies into ELISA Units.

21 September 2020 3,286 3 View

Is it possible to have grains in the range of 50-80 micron (2-5 min of contact time) in 6061 and 6063 alloy after the addition of TiBAl (5:1)?

If 0.2% of TiBAl (5:1) is added in 6061 and 6063 aluminum alloy what is the grain size for 2-5 min of contact time?

20 September 2020 4,265 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How to get/count refractive index in gasses?

20 February 2021 8,202 6 View

Can one use just 250 micron sieve & still get a good number of mycorrhizal spores from the soil?

In a situation where one cannot get the appropriate & separate levels of sieve for mycorrhizal survey work, can just one level of sieve give good results & spore counts?

13 February 2021 3,760 2 View

How to make Fast Green FCF from powder?

Hi everyone We need Fast Green to electroporate plasmid into mice embryos, therefore we simply need it to see some color in the liquid we are electroporating so that electroporation is more...

07 February 2021 1,671 2 View

Which fungicide are good for primary cells? Does it yeast contamination? How to get rid of them without killing the cells? How to get rid of spores?

Hello! Our lab is working with primary cells which we are isolating from the colorectal tissue. During the isolation, we are washing the tissue with pen-strep and then also add some pen-strep in...

07 February 2021 8,258 3 View

Which is the best software for the simulation of tribological properties of materials?

I want to simulate the tribological properties of solids, liquids, and fluids, please suggest good software.

02 February 2021 3,947 3 View

Does anybody work with CoolLED in fluorescence microscopy?

I have trouble with exciting wavelengths higher than 460 nm while e.g. ex with 405 nm works. Filtercubes are correc, as I used them with my old xenon lamp before... I work on axiovert200M and with...

25 January 2021 5,201 2 View

How to prepare a liquid sample for FTIR spectrum?

I have a ethanol-water 50% extract of mango peel. I purified mangiferin from the extract with filtration and precipitation. so i obtained a low concentrated extract which i want to se the IR...

24 January 2021 8,880 7 View

Why high voltage and current (and some gases) Cause Spray-mode metal transfer in Gas-Metal Arc Welding (GMAW)?

This transition phenomena of Globular to spray mode as voltage , and especially current is raised, is very commonly known to Manual Metal Arc Welding (MMAW) and Gas-Metal Arc Welding (GMAW)...

20 January 2021 7,984 2 View

Can you have pressure inlet and velocity inlet at the same time?

I was reading a reference (Reitz-A Photographic Study of Flash Boiling Atomization). In his experiment, his boundary condition is delta p and constant velocity. The liquid injection pressure was...

18 January 2021 842 9 View