When designing a wilkinsons power divider, I had to place a resistor. But when I choose the edges and place the resistor, it keeps throwing errors. I am not able to recover from the error. It says
The lumped element Folder1:element1 is inside perfect conducting material. Please check the element location.
Matrix calculation failed with mesh type "PBA". Please consider using "FPBA" (Mesh Properties->Specials...->Mesh type).
For high accuracy requirements consider activating "Enhance FPBA accuracy" as well.
The lumped element is on the conductor.But It says it is inside the material.
Can anyone help in this regard.
Thank you.
https://www.researchgate.net/post/How_can_I_connect_lumped_element_resistor_capacitor_inductor_in_a_structure_in_CST_microwave_studio_Is_this_possible
Dear Azita Gudarzi
I want to represent a resistive load at the end of TL , when doing it by HFSS , it works well, but with lumped RLC on CST 2016 it gives bad results
Can you help me ?
Is there another method to represent a resistive load by CSt 2016?
This means that the boundary condition has been set to PEC. Go to "Simulation" tab and Change "Background" to Normal from PEC. Your problem will be solved.
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials
- Semiconductor