Stacking of 2-D images in to a 3-D ?

I have sliced 50 mm cube in to 1mm slices. The cube has voids which are changing with depth. So if I stack the 2D slices I get a 3D structure. But i have a few questions : a) how should i align...

11 December 2017 5,508 0 View

How to open the DSC files i.e NGB-DS1 files ?

i have recently sent some samples for DSC testing those people gave me excel files and files with NGB-DS1 extension i am unable to view these files , and i am not an expert of origin either. i...

10 November 2017 445 0 View

Should i change the pressure in an NPT ensemble ?

i am doing MD simulation, in my case i doing simulation at 300 kel, 500 kel using NPT ensemble. But if i increase temperature in the ensemble, i should also increase the pressure also (i guess) if...

04 May 2017 4,797 9 View

Why SEM imaging not showing any variation ?

this is an image of cement, as we know it has mineral compositions, but in BSE there was no variation in image colours. Can any body advice me on how to get the colour gradients (i.e minerals...

04 May 2017 7,007 6 View

Can some share an input file for INTERFACE FORCE FIELD ?

i need to a input file for INTERFACE FORCE FIELD for material studio software. so please share a file of the force field

01 February 2017 4,727 1 View

How to convert a .cif file to .data file ?

Was any one able to convert a .cif file to .data file for importing it in to LAMMPS I though VNL would help it but I did not end up in success. So if any one can share some other software that can...

01 February 2017 5,047 4 View

How can i input an nano tube in to a unit cell ?

i have a nano tube in material studio and i imported an CIF file. but now i want to place a nano tube in to the unit cell. plz some one let me know about it.

11 December 2016 8,305 0 View

Importing from material studio to abaqus ?

i would like to import the unit cell in material studi to abaqus. so please let me know wether it is possible or not. i want to import tricalcium aluminate file in to ABAQUS for applying...

04 May 2016 3,821 0 View

What are the thermal properties of concrete ?

i am looking for thermal properties of CSH gel and ettringite at temperatures ranging from 100 to 1000 deg for an interval of 100 deg. I could not find any relevant material regarding this. I want...

11 December 2015 5,022 3 View

Does any one have an gif file for silica nano tube ?

I am looking for silica nano tube, which I am not able to obtain from any were, so if any one has an .cif or .xyz format file of silica nano tube plz share it.

01 January 1970 7,335 2 View

In Molecular Dynamics Simulation, how do I make changes to the force field according to my protein?

Hi In Molecular Dynamics Simulation, how do I make changes to the force field according to my protein? I got this error in the add-ion stage: Fatal error "./ amber99sb-ildn-HHH.ff / force...

01 March 2021 8,747 4 View

Timeout error!! Processor in the loop (PIL) using STM32F4 Matlab 2018a?

Dear Researchers I am trying to perform a PIL simulation using STM32F4 Discovery board and comunication serial USB TO TTL. During simulation I receive the following timeout error: An error...

01 March 2021 2,327 1 View

What is Flat Lens Antenna?

28 February 2021 5,433 3 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

How Can I clain a removal of a co-author?

I would like to make a correction in a co-author in your paper which is wrong. This name is also in other papers of Kenton Ko. Zey Ko is not a Co-author . The correct name is Zdenka...

24 February 2021 3,476 4 View

How does the injection volume impact LLOQ and ULOQ in regression analysis (LC-MSMS)?

Hello, I have run into an issue that has sparkled a debate at work: is the LLOQ/ULOQ impacted by injection volume under the following circumstances: 1) Same dilution factor of all samples 2)...

23 February 2021 9,159 3 View

Why does the sum of reaction forces not match the force component of a Free Body Cut in Abaqus?

I am using Abaqus to simulate a plate with in-plane loading. The boundary conditions allow the right edge to move up and down, the displacements on the left edge are fixed. There is no rotation...

23 February 2021 711 3 View

Difficulty in debugging code to correct error - TypeError: '<' not supported ?

I am trying with a Unet code ontained from net ...in tensorflow. When trying to predict the segmentation result with the trained and saved model with metric " iou" using "CustomObjectScope"...

22 February 2021 5,254 1 View

How to perform Haldane correction on SPSS?

I was wondering if anyone knew how to perform the Haldane correction for SPSS (this is the definition of the correction -...

21 February 2021 2,882 1 View

How to include additional force field in GROMACS?

I have a cellulose model system that is best described by the GLYCAM06 force field according to the literature. However, the set of force fields included in the GROMACS package doesn't include the...

20 February 2021 3,309 3 View