In general tensile strength of Silicone rubber is low.
I want to ensure decarburisation in steel materials that are carburised and quenched during metal cutting such as hobbing. If it is related to Fick's law is this possible with temperatures...
23 January 2024 1,737 0 View
Hello, can someone help me to get this autoclave reactor service for mineral carbonation purpose (in Malaysia or outside Malaysia)? For your information, I am using a solid plug sample for this...
12 October 2023 4,405 0 View
For researchers familiar with the study of decarburization: In a high-speed machining process applied to carburized quenched steel, where machining temperatures are predicted to be near A1 and of...
08 August 2023 8,354 2 View
This questions is for beginner students only.
23 May 2023 10,002 3 View
This question is only for beginners.
23 May 2023 642 2 View
How accurate are XRD measurements with Rietveld analysis when compared to other measurement methods in determining the weight fraction of carbon in steel? Hopefully those experienced with this...
31 March 2023 3,702 6 View
Is there a specific approach that can differentiate between the influence of temperature and mechanical effects on the phase changes occurring in the microstructure of steel during high-speed...
15 February 2023 6,867 9 View
A sample of steel will be prepared for microstructure analysis by XRD method. The surface will be removed in 0.1 mm increments until it reaches a depth of 1 mm. Each new surface will be...
12 January 2023 8,954 9 View
I would like to prepare a thin sample of steel using the ion milling process. Will this process result in any changes in the microstructure and chemical content of the steel due to the cutting...
13 December 2022 6,144 3 View
Machining of steel metal will result in surface integrity which is related to tribological effects. Does the content and final phase occurring in iron-carbon alloys on steel surfaces have an...
17 November 2022 2,390 3 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)
03 August 2024 8,538 4 View
How do you tie-break and rank these two in their strength?
03 August 2024 4,471 1 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...
03 August 2024 6,500 3 View
Hi, I am working on a head FE model and want to try different material types on brain. I read some papers that use Mooney-Rivlin rubber model and wondering if i can add viscosity into it. Is it...
24 July 2024 5,908 0 View
My research work is related to the calcination of limestone. I have a complex question and would like to consult with experts in this field. Could you please advise which kiln to choose (a...
18 July 2024 1,390 2 View
I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...
13 July 2024 3,631 4 View
In the expression for solid solution strengthening model that has been widely used in the literature use a linear form consisting of strength coefficient, and concentration of elements in wt.%....
11 July 2024 4,476 3 View
Polymeric film such as latex rubber substrate or polymer
01 July 2024 8,343 4 View