How to do wet chemical etching of Ni Foam and separate the coated material from it ?

09 September 2017 0 7K Report

I have coated ZnCO2O4 on Ni Foam by chemical method. To do XRD the material have to be separated from Ni foam to avoid Ni peaks

Badges
Science method

More Vasanth Raj's questions See All

How does one increase the adhesion property of the film while electrodeposition on metal (Cu,Al) substrates?

Is there any special substrate treatment procedure is available before electrodeposition?

05 June 2013 1,639 5 View

What is the ralation between current density and charging time?

What is the relation between current density applied to the electrode (anode or cathode) in a lithium ion battery cell, and the charging time the electrode takes? Can the capacity of the electrode...

10 November 2012 2,521 3 View

What happens to a semiconducting material band gap when it is annealed? Does it increase or decrease?

When compared with its as-prepared sample.

09 October 2012 8,459 5 View

I need JCPDS file of LSFCO nanomaterial. Can anyone provide me?

Require for Rietveld refinement in XRD.

08 August 2024 3,081 2 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

How to fix background error in rietveld refinement of one XRD peak using GSAS-II?

I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II

05 August 2024 5,291 2 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

Hello, regarding Mxene 2D titanium carbide?

I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.

02 August 2024 6,789 4 View

Melt curve problem in qPCR?

Do these peaks in the curve indicate primer dimer or non-specific products?

01 August 2024 7,466 0 View

How to improve peaks separation in HPLC?

Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...

30 July 2024 435 3 View

Why Powder XRD is performed after cruhsing a crystal if Single Crystal XRD analysis of the same crystal has been performed already ?

What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?

30 July 2024 6,261 4 View

Can anyone guide me the best method to analyze the XRD data???

I will be doing an XRD on a sample which is powdered in natured and is a hydrogenated compound. I would like to know how we can understand the individual components and components by using the...

28 July 2024 4,548 2 View

Guidance needed for preparing the hydrogel samples for the XRD instrument?

I'm working with a hydrogel sample and I'd like to perform XRD analysis. Can anyone offer guidance on preparing the hydrogel for the XRD instrument? Specifically, I'm unsure about the best method...

20 July 2024 3,611 4 View