How to do flow field simulation of EDM?

More Shashank Thool's questions See All

How to extract data of Acoustic Doppler velocimeter (ADV) .vno file into excel?

. vno file to excel file.

17 September 2023 3,788 0 View

What is the effect of metal precursor source on synthesis of MOF?

what makes the difference if we choose metal chlorides or acetates instead of metal nitrates for synthesizing MOFs

15 May 2023 1,652 3 View

How can we calculate the regenration temperature of an adsorbent using the value of heat of adsorption?

From the adsorption studies at different temperatures, i have calculated the heat of adsorption for the adsorbent. Using this value, how can we calculate the regeneration temperature? or can we...

17 April 2023 4,318 4 View

How can we analyze adsorptive sites for CO2 in MOF by doing FTIR of a sample after CO2 adsorption?

06 April 2023 2,222 0 View

My XPS spectra of Nickel 2p of MOF is showing huge noise. What could be the reason for this?

03 April 2023 5,750 3 View

Which solvent is used to disperse HKUST MOF for UV-Visible spectroscopy and particle size analysis?

03 April 2023 4,403 4 View

How to immortalize primary cells with Lentriviral transfection ?

We work on primary Cancer cell derivation from patient samples so i want to immortalize a cell type can anyone suggest lentriviral protocol

22 February 2023 6,704 2 View

Can I calculate NUE using the data of N uptake by crop and amount of fertilizer N added? Any suitable formula for it would be helpful?

I have data of N uptake by crop and fertilizer n added to the crop. Can I calculate NUE with just these two?

29 August 2021 5,477 10 View

Can some share protocol for gH2AX staining of mice brain tissue sections ?

Hi, I want to stain brain sections of mice which have been xenografts with tumor and treated with a new anti cancer agent. Can some please share the protocol with me including tips and does and...

11 April 2021 6,637 2 View

How to check the radiation characteristics of IR thermal emitters using COMSOL?

I have designed a MEMS-based IR thermal emitter and done the electro-thermal simulation to get the temperature profile of micro-heater. Now I want to check the radiation intensity vs wavelength...

14 October 2020 4,673 2 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

How does grain and grain boundary affect the ceramic when studying its dielectric properties?

I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...

07 August 2024 5,177 3 View

Why is the molecule's orientation with an electric field affect polarizability?

Why is the molecule's orientation with an electric field affect polarizability? Electrons are diffuse enough to be independent with respect to orientation and effect of electric field on...

03 August 2024 7,843 1 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

Does continues partial charging/discharging do any harm to the BESS performance and degradation?

For a grid connected BESS (lets say 100 MW/200 MWh system, LFP battery), if we charge the BESS in such a way that whenever we can access power from the solar that will charge the BESS. Hence it...

01 August 2024 9,903 7 View

When I simulate for S parameters using ADS, I have faced this issue that I have attached. Please anyone clarify me?

...

31 July 2024 1,671 3 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

How to check pH of a high strength hydrogel?

We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...

30 July 2024 942 2 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

Xiangzhi Wang

Just simulate internal flushing flow maybe have little help in finding the mechanism of EDM, the best way is to simulate the plasma channel and the relationship between flushing flow and plasma channel.

SEE my paper : Article Hydrodynamic arc moving mechanism in EDM of polycrystalline diamond