How do we optimise/determine voltage (-1.5 V ~ +1.5 V) range across a working electrode? Is there any way to figure it out?
You can optimise it using linear voltammetry with different sweep speed.
Hi there, thanks for the answers. Yes, I tried both linear and sweep voltametry, but still does not work. My working electrode is in a two electrode system (W and C). We aim to optimise to screen the driving factor.
I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...
01 March 2021 3,703 3 View
There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.
26 February 2021 5,851 1 View
24 February 2021 3,348 2 View
I am performing a simple close range photogrammetry test and comparing outcomes of photogrammetry tools such as VisualSFM, Meshroom, Colmap etc. Kindly advice, what post evaluation tests/ criteria...
13 February 2021 6,410 3 View
In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...
11 February 2021 4,006 8 View
Various schools have emerged in the study of comparative literature. Mention the most prominent of them in a nutshell. And he talked about one of them?
09 February 2021 1,099 8 View
While reviewing technical articles, I encounter some papers where authors have used data balancing before splitting test and train (on full data), and some only balanced training data and let the...
04 February 2021 1,446 0 View
severity index, measuring method and procedure detailed
01 February 2021 1,160 11 View
The 1st image shows the moment when I import my design(IGES) into the Mechanical APDL. The 2nd image occurs when I wanted to Operate>Boolean>Divide Volume By Area. The design is a regular...
28 January 2021 2,962 3 View
I want to write a code related to the flutter of aeroelastic wing under unsteady load using doublet lattice method (DLM). I want a good reference with numerical examples or a book which learn me...
25 January 2021 7,488 3 View
I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...
02 March 2021 5,829 1 View
I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...
01 March 2021 395 3 View
I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...
27 February 2021 1,829 3 View
During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...
25 February 2021 7,994 3 View
I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...
23 February 2021 9,592 2 View
What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.
22 February 2021 1,515 1 View
One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...
21 February 2021 418 2 View
Hello everyone Do you have any information about this error 'The experiment was stopped by a potential overload on Vs (auxiliary electrode)' in Origamaster software? I tried everything possible,...
19 February 2021 3,152 7 View
The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...
18 February 2021 4,430 1 View
I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...
18 February 2021 1,450 3 View