Dear Dr. Jacques Peixoto ,

I suggest you to have a look at the following, interesting paper:

- Platinum as a Reference Electrode in Electrochemical Measurements

By Kasem K. Kasem and Stephanie Jone

Platinum Metals Rev., 52, (2), 100–106 (2008)

Available at: file: https://tinyurl.com/y5hxm7xt

Best regards, Pierluigi Traverso.

Dear Pierluigi Traverso,

I've already come across this publication while doing my research, but I haven't found the solution to my problem.

Did I misread or misinterpret it?

Best regards,

Jacques Peixoto

Pierluigi Traverso

Dear Dr. Jacques Peixoto,

it seems to me that the submitted publication does not present particular problems in the use of a Platinum wire as a Reference Electrode in Electrochemical Measurements. Aside from pure theory, given the assumptions present in the paper, you do not consider it reasonable to do some experimental tests, in your measurement conditions. This to evaluate how a traditional system actually behaves (e.g. stability, using an SCE) in comparison with the new configuration that you propose. Also the experimental part has its importance to then draw the appropriate conclusions ....

Good luck and my best regards, Pierluigi Traverso

Dear Dr. Pierluigi Traverso,

Thank you for your response.

I'm going to compare the results I've obtained with the results in the literature and deduce the potential.

Best regards,

Jacques Peixoto

Juan Genesca

Dear Juan Genesca,

Thank you for your advice.

I think I found the way to caracterize my pseudo electrode.

But I'm still gonna read your reference

I wish you a great day.