Given an accelerated carbonation test, say, 30 days with a given CO2 concentration well above the natural level, which formula is most suitable for converting the 30days to natural carbonation?
In the treatment of children with orofacial clefts the early stage of orthodontic treatment involves pre-surgical infant orthopedics, which can be achieved in different ways and with different...
22 August 2020 2,765 2 View
I applied LSTM in two different problems. In one case the network performed well while in the other, the network performance was very poor. Is there any other algorithm with Matlab code or App...
21 March 2020 9,446 2 View
Please, what are the likely post estimation tests panel dynamic ols (PDOLS). And I have some challenges, when I use the inbuilt e-views 9 conintegrating regression and the manual procedure by...
15 November 2019 1,912 1 View
Does anyone know of any annotated facial VIDEO datasets?
10 October 2019 1,874 3 View
I need a particular with different molecular weight. For example SBS in 2 , 5, 10, 30, 50, 80, 120, 200 kDa.
29 March 2018 1,371 2 View
In most research works, the word parametric analysis have been used for correlation between two variables. Whereas the variables could have failed in test of normality and homogeneity, can it also...
29 December 2017 9,500 4 View
I looking at possibility of extracting advantages of these polymers; polyethylene (PE), Ethyleneibutyl acrylate (EBA), ethylene-vinyl acetate (EVA), styrene-butadiene-styrene (SBS),...
15 November 2016 973 5 View
I am curious to know why a methodology will get acceptance in one journal for a given topic and get rejected in another journal for another topic. Take Artificial Neural Networks (ANN)...
01 January 1970 7,971 11 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
can anyone help me in this, it will help me with my research work
01 March 2021 834 3 View
I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...
01 March 2021 736 3 View
Nanotechnology in concrete materials
01 March 2021 3,379 3 View
I am looking for datasets similar to this one: http://archive.ics.uci.edu/ml/datasets/Concrete+Compressive+Strength I am looking for concretes with different types of aggregates (Recycled,...
27 February 2021 6,801 3 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View
In Finite element software like ANSYS , there is difficulty in obtaining direct results of twisting of concrete members because SOLID65 which is the unique element designed to represent concrete...
26 February 2021 3,806 2 View
Looking for the quantity of cement, sand, and gravel of footings and columns. Thank you!
25 February 2021 3,092 2 View