I am doing experiment on electrocoagulation. For variation in current and voltage used DC power supply. which takes input from AC supply convert to DC supply and able to regulate the voltage for electrocoagulation reactor. Is the voltage and current at input of DC supply or output of DC supply will be used for determination of specific energy consumption calculation. Will the AVO meter used for checking voltage, current and resistance from AC ( Alternating current) supply or DC (Direct current) voltage supply can be used for specific energy consumption calculation. The formula for specific energy consumption calculation is
SEC = Voltage (Voltage)X Current (Ampere) X time (hours)x 1000/ ( Initial concentration of pollutant- final concentration of pollutant)mg/liter x Volume of wastewater treated (liter).