How to calculate carbon footprints for a manufacturing process?

More Janak Valaki (PhD)'s questions See All

How we can calculate the STH efficiency Hydrogen evolution?

We are using Agillent Gc system, and we are able to find the percent volume of hydrogen evolution through this system, i am interested on calculating the STH efficiency of hydrogen evolution. Any...

19 June 2024 3,527 1 View

How we choose the suitable circuit model for EIS measurement?

I am trying to fit my EIS data, I would be very grateful if you share your ideas regarding this technique. Thank you.

05 June 2024 2,633 3 View

How we can calculated the carrier concentration for n -type semiconductor by using Mott- schottky plot?

I am interested in calculating the carrier concentration of both n-type and p-type semiconductors by using the Mott- Schottky plot. I would be very grateful if you could give me some suggestions...

22 April 2024 6,393 1 View

We usually use to measure the band-gap of bulk material, how we can consider the band-gap of nanostructure for photocatalyst?

For good photocatalyst band gap should be also in range for light absorption. I want to know relation between bulk and nanostructure bandgap for choosing photocatalyst.

29 March 2024 3,299 2 View

How can we deduce thermodynamic, kinetic and mechanistic characteristics of electrode reaction by using cyclic voltammetry?

Cyclic Voltramettry

26 March 2024 3,492 1 View

Is there any application, software or website that i can use for generating plagiarism reports, against my research, without involving a university?

In case one is not registered with a university?

25 March 2024 6,126 1 View

What is the relationship between carrier concentration and bandgap in semiconductor?

I want know more about relationship between carrier concentration and band gap on semiconductor or metal oxides.

15 March 2024 452 3 View

How can we measure and calculate the photoconversion efficiency of a semiconductor photoanode in water splitting ?

How can we measure and calculate the photoconversion efficiency of a semiconductor photoanode during water splitting process.

14 January 2024 7,564 2 View

Reading BAM files by IGV?

While reading a BAM file by IGV software, how many reads (replications) is enough to make a decision that it is a (deletion)? Thanks

19 November 2023 669 1 View

Dear Scholars, please what research design is best when assessing the acceptance of HPV vaccine?

A description of the readiness for the acceptance of PHV vaccine would be necessary in this world of preventive medicine.

08 November 2023 4,545 4 View

Could you recommend some articles on Urban Transportation System optimization and Innovation?

13 August 2024 2,595 3 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

What are the roles of innovation in achieving the Sustainable Development Goals (SDG)?

31 July 2024 3,533 2 View

A Question about Phd thesis?

Hello everyone What is your opinion about the introduction of an expert decision support system in which the rules are extracted from existing data without human intervention, instead of being...

31 July 2024 5,785 4 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View

After a lot of feature engineering for CTR modeling, it feels like it's basically the end of iteration? I mean, it's not cost-effective to keep doing?

After a lot of feature engineering for click-through rate modeling, it feels like it's basically the end of iteration? I mean, it's not cost-effective to keep doing it?

29 July 2024 4,955 0 View

Arvind Singh

Please have a look at these researchgate links.

https://www.researchgate.net/publication/257711472_CO2_Emission_Calculation_and_Reduction_Options_in_Ceramic_Tile_Manufacture-The_Foshan_Case

https://www.researchgate.net/publication/46289480_Carbon_Footprint_Current_Methods_of_Estimation

https://www.researchgate.net/publication/257408797_Carbon_footprint_analysis_in_plastics_manufacturing

https://www.researchgate.net/post/methodology_for_calculation_of_carbon_footprints_for_urea_fertilizer_industry

Good luck

Article CO2 Emission Calculation and Reduction Options in Ceramic Ti...

Article Carbon Footprint: Current Methods of Estimation

Article Carbon footprint analysis in plastics manufacturing

Janak Valaki (PhD)

Thanks Dr. Arvind.

Bruno Durand

To calculate carbon footprints for a manufacturing process you have, first, to make it for raw materials carbon footprint.

Thanks Mr. Bruno