How to add HZO material in silvaco atlas TCAD Tool?

How can I calculate AlGaN/GaN HEMT Breakdown Voltage on Silvaco TCAD?

Hello, I'm newbie to TCAD. I wanna calculate Breakdown Voltage of AlGaN/GaN HEMT. But, my code shows just saturation. Could you please help me how to simulate Breakdown Voltage of my code? And...

25 July 2024 3,738 1 View

How can i solve the code problem in Sentaurus TCAD?

Currently, I have created a gate-all-around process using sentaurus tcad and I am trying to measure the noise using the cmos noise code. However, an error occurred during the simulation. The error...

24 July 2024 6,352 0 View

TCAD how should i define this Doping Dependece?

The material is SiGe

03 July 2024 1,374 0 View

Taking a cut line through deck build in silvaco?

Hi everyone hope your all doing good. I’ve been looping my scripts and am trying to take a cut line of the conduction band energy with respect to y for each loop. Basically, I want to take a...

03 July 2024 9,134 1 View

Which size of undersized iron pellet is suitable for sponge iron tunnel kiln production?

Someone advise me to use 1 to 2mm undersized pellet but it is not available. Do anyone have any experience in the field of tunnel kiln ?

28 June 2024 6,355 0 View

How to define LaZrO2 material with high dielectric value in silvaco atlas?

I'm trying to use this novel material (LaZrO2) as a gate oxide in SOI using 'user.material' syntax but getting an error

28 June 2024 3,150 1 View

If I introduce a New Formula in parameter file Sentaurus TCAD what should I do?

I want to add new mobility model which is not in Sentaurus TCAD .

26 June 2024 9,991 0 View

How to simulate crossbar architecture of SNN?

I can understand that we can use Sentaurus TCAD for designing neuron and synapse. But to implement full crossbar architecture using these neuron and synapse for image classification application,...

16 June 2024 6,879 0 View

How to set the background of plot to white color in Silvaco Tonyplot?

Figure 1 is my plot, the background will be colored when the quantity is set to electron concentration. While Figure 2 is the figure i want. How to set the background to white color when the...

11 June 2024 8,621 1 View

Why silvaco TCAD the output characteristic curve current is adverse?

I want curve in paper file.But the result of my simulation is that the current is negative, I don't know why?After I tried to change the drain voltage to positive, the curve was right, but it...

08 June 2024 5,351 3 View