What is the main job of the associate editor?

After submit the manuscript, the paper is assigned by editor in Chief and then assigned to associate editor.

09 October 2018 1,867 0 View

What is the pore-scale phase field model?

Pore-scale modeling is used while modeling of multiphaseflow through porous media.

06 July 2017 3,410 1 View

What is the density-functional theory?

06 July 2017 1,797 5 View

What are the major phenomena that limit PV efficiency of the module

PV/T concept offers an opportunity to increase overall efficiency by making use of waste heat generated in the PV module.

01 January 1970 9,381 1 View

Why the dispersed phase method cannot be applied for the simulation of complete phase change process inside porous media?

The dispersed phase method assumes one continuous phase and one dispersed phase, where the average droplet diameter of the dispersed phase has to be specified a priori.

01 January 1970 7,015 1 View

What are the open-source softwares that can be used for modelling the complete phase change process inside porous media assuming turbulent flows?

modeling of liquid-vapour phase change process inside porous media

01 January 1970 308 5 View

On what depends the photovoltaic efficiency of solar cells?

A hybrid PV/T system.

01 January 1970 6,887 4 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Is there a powerful system for the security of the systems distributed on IoT systems?

Is there a powerful system for the security of the systems distributed on IoT systems?

02 March 2021 3,858 10 View

How Relativistic effects is one reason for lanthanide contraction?

The Lanthanide contraction which is the decrease in ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, is due to poor shielding of the 4f...

01 March 2021 2,272 4 View

Can we distinguish the type of free fluid inside the pelvic and abdominal cavities whether blood or serous fluid using the ultrasound?

during ultrasound examination of acute abdomen, sometimes we see free fluid , can we know the type of fluid ,whether blood or not , using ultrasound only? if yes , what are the sonographic...

01 March 2021 7,476 4 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View