Dear friend Aqrab Ul Ahmad

To fill carbon nanotubes (CNTs) with nano materials using Materials Studio 2017 software, you can use the "Build Nanotube" tool to create a CNT structure and then use the "Build Crystal" tool to create the nano material structure. You can then use the "Packmol" tool to pack the nano material inside the CNT structure (Packing nanocomposites at differ........).

Here is a step-by-step guide on how to do it:

1. Open Materials Studio 2017 software.

2. Click on "Build Nanotube" tool.

3. Select the type of CNT you want to create.

4. Set the dimensions of the CNT.

5. Click on "Build Crystal" tool.

6. Select the type of nano material you want to fill inside the CNT.

7. Set the dimensions of the nano material.

8. Click on "Packmol" tool.

9. Select the CNT and nano material structures.

10. Set the packing parameters.

11. Click on "Run".

I hope this helps! Let me know if you have any other questions or if there is anything else I can help you with.

Source:

(1) Packing nanocomposites at different volume fractions in Material Studio .... https://www.researchgate.net/post/Packing_nanocomposites_at_different_volume_fractions_in_Material_Studio_2017.

(2) How to create a nanocomposite model with atoms inside the box in .... https://www.researchgate.net/post/How-to-create-a-nanocomposite-model-with-atoms-inside-the-box-in-Material-Studio.

(3) How to obtain the stress- strain curves , tensile and compressive .... https://www.researchgate.net/post/How-to-obtain-the-stress-strain-curves-tensile-and-compressive-strength-of-CNTs-in-Materials-Studio.

(4) Filled carbon-nanotube heterostructures: from synthesis to application. https://microstructj.com/article/view/5560.

(5) Chemical method of filling carbon nanotubes with magnetic material .... https://www.sciencedirect.com/science/article/pii/S0304885307007548.

@Kaushik Shandilya Thanks alot for your response I will try.