What happens when gold NPs absorb light to show color?

Is there any emission happening here? What is the role of the emission( if happened) with color?

10 November 2018 9,651 0 View

1.Are immunosensors better than immunoassay? 2.And what are the differences between immunoassay and immunosensor ?

why immunoassay and immunosensor are different?

05 June 2018 4,962 0 View

How the image is formed in FTIR microscopy?

What is the procedure of forming chemical images in FTIR microscopy?

31 December 2017 4,055 2 View

HI Can any one tell me how can i understand that my reduced graphene oxide is agglomerated?

Graphene agglomiration

04 May 2016 6,241 4 View

About electrichemical synthesis of graphene

03 April 2016 1,863 2 View

Hi can any one let me know which graphene is suitable for device applications the single layer or multiple layer and why?

hi can any one let me know which graphene is suitable for device applications the single layer or multiple layer and why?

03 April 2016 7,031 5 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What is the exact mechanism of the antimicrobial effect of local anesthetics?

The antimicrobial effect of local anesthetics has been known for more than 50 years, but it still seems to have an unclear mechanism of action. which bacteria? which concentration? etc etc. ....

27 February 2021 4,450 2 View

How to replicate the well conditions of a crystal hit with 20%(w/v) isopropanol?

I had a crystal hit in a well with 0.1M HEPEs pH 7.5, 10%(w/v) PEG 4000, and 20%(w/v) isopropanol. Why is isopropanol in w/v here if it's just solvent? How do I recreate this well condition?

25 February 2021 9,761 1 View

Uncertianiny in using dry or wet basis in mixing a sediment with fuel oil?

Hello I'm currently working on a topic related to studying the anaerobic biodegradation of TPH in marine sediments. In this work, sediment should be mixed with fuel oil to a concentration of 20 g...

24 February 2021 9,839 3 View

Advice on growing lactobacillus species in the lab?

Hello everyone, For part of my PhD project, I'm hoping to grow some lactobacillus species in the lab so that I can create standard curves for a qPCR quantification of a faecal sample. However, I...

24 February 2021 3,157 6 View

Can I use a protein-devoid condition as my negative control in ELISA?

Hello, I am running a sandwich-type ELISA where I am trying to inhibit a protein-protein interaction using small molecules. For each experiment, I determine my Z' (Z-prime) to determine the...

23 February 2021 7,429 1 View

Thermal reduction of graphene oxide.?

I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...

23 February 2021 4,155 4 View

How to build fluid structure interaction simulation for elastic ring squeeze film damper in COMSOL?

How to build fluid structure interaction simulation for elastic ring squeeze film damper in COMSOL?

22 February 2021 5,408 1 View

Is there an ideal incubation time of RGO-modified SPCE before subsequent use, i.e., electrochemical characterization or further modification?

I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...

22 February 2021 5,324 3 View

What are the best cations for preparing competent cells, Ca2+ or Mg2+?

I have been reading various articles and most state that treatment with CaCl2 produces higher efficiency of transformation than MgCl2. Can anyone explain why Ca2+ is better than Mg2+ at...

16 February 2021 8,519 5 View