How I can prepare, non-stick ceramic coatings on Al substrate?
3D printing is a process of making three dimensional solid objects from a digital file which object is created by laying down successive layers of material until the object is created
07 August 2019 7,168 1 View
CAB is similar for cellulose diacetate except that it is tougher, more durable and has better dimensional stability
09 October 2018 2,191 0 View
Fourier Transform-Infrared Spectroscopy (FTIR) is an analytical technique used to identify organic (and in some cases inorganic) materials. In this study, nano silver coated on the fabric at...
07 August 2018 6,253 3 View
UV spectroscopy is an important tool in analytical chemistry .When UV radiations are absorbed, this results to the excitation of the electrons from the ground state towards a higher energy state....
07 August 2018 8,286 7 View
The FTIR results revealed a increase in the peaks intensity for Ago-coated polyethylene terephthalate (PET) in the 2000–4000 cm-1
07 August 2018 3,693 0 View
Two different salt were solved in the distilled water in room temperature. The final reaction was done by hydrothermal method. So, I want to calculate the weight percentage the production. Can...
07 August 2017 7,985 1 View
I want to measure the contact angle of the nano metal oxide such as, Zn, Ag and Cu.
06 July 2017 434 7 View
Mechanical alloying (MA) is a relatively novel method that has been successfully applied for materials, such as intermetallic compounds and transition metal carbides, which are difficult to...
06 July 2017 1,200 10 View
The Burgers vector associated with a dislocation is a measure of the lattice distortion caused by the presence of the line defect. During mechanical alloying, the powders are subjected to...
02 March 2017 8,263 0 View
Density is defined as mass per unit volume. The density of the majority of the material is available in the literature. Actually I would like to find the density of TiC0.7N0.3 please let me know.
09 October 2015 3,556 2 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...
28 July 2024 5,771 2 View
Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?
27 July 2024 648 3 View
// interested in the difference between floating events and short circuits.
22 July 2024 6,565 0 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
Chemical Engineering /Food Engineering
20 July 2024 4,152 4 View
I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...
16 July 2024 3,212 5 View
I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...
10 July 2024 2,789 4 View