What is the mechanism in terms of electronic configuration and band gap for zinc ferrite to behave as a semiconductor?
I am working on Drug loaded magnetic nanoparticles for tumor applications. My work comprises of multifunctional magnetic nanoparticles which includes magnetic hyperthermic study as one of the...
10 November 2018 7,314 3 View
I have to do bilayer multiferroic thin films, i have a doubt of how to take top and bottom electrode connection?
09 October 2016 6,847 1 View
08 September 2016 7,791 5 View
Does Pristine zinc ferrite thin films show dielectric and conductivity property?
08 September 2016 3,402 3 View
How does zinc ferrite act to be a promising semiconductor?
06 July 2016 1,520 3 View
What is the density of zinc ferrite material to measure the thickness of thin films
02 March 2016 7,785 5 View
In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?
01 March 2021 1,923 3 View
25 February 2021 5,713 1 View
It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...
24 February 2021 5,974 4 View
Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...
23 February 2021 9,799 4 View
I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...
17 February 2021 8,104 4 View
I am trying to do some MD simulations of a protein with zinc ions. I am trying to use a charmm forcefield (I have tried 2017 and 2021) and Gromacs. I get an error when doing pdb2gmx Residue 'ZN'...
12 February 2021 9,367 2 View
I am attaching my design and result of Gains.S11 parameter is less than -10dB from 3.1 to 9.8 Ghz.Z11 magnitude also lies between 40 -60 ohm for this range .Still gain is negative. Pls help
29 January 2021 4,334 3 View
I have a design with 2 dipoles working at different frequencies joined in one system and separated by Ferrite. I think, Ferrite was used to minimize the interference between 2 antennas as much as...
25 January 2021 5,918 3 View
In order to enhance the antenna parameters, meta-material unit cells are added but where to load them is more advantageous either at ground plane or at the patch side, also is it necessary to add...
24 January 2021 2,999 4 View
I am looking some resist strippers which can easily remove metal based polymer residue after post dry etch process. I have some candidates below but not sure if they are compatible with doped...
21 January 2021 3,008 3 View