How does Trnsys component type 682 flow stream load work....?

Hafiz Muhammad Ushamah @Hafiz-Muhammad-Ushamah

07 March 2021 0 754 Report

i want to apply a load on a flow stream i know that type 682 is used for this purpose but i am unable to set it up properly and i am dont know where i am executing it wrong can someone help me out...

Regards

Badges
Science topic

More Hafiz Muhammad Ushamah's questions See All

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

How to include original NMR data in a manuscript?

hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...

27 February 2021 734 4 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View

How to identify when a gaussian program is about terminate normally?

Dear all, I am trying to optimize a bimetallic complex using # opt=tight b3lyp/lanl2dz scf=qc geom=connectivity. The program is running for around 5 days but the size of the .chk remains same...

05 February 2021 8,721 3 View

What is the reason for using Glass Impingers?

Impinger bottles are used at some applications, where the gas is cooled and the condensate is dissolved in a solvent contained in the impingers. I have always seen impingers made of glass. Why not...

03 February 2021 6,959 2 View

How to design an Ultrafiltration membrane for a CSTR?

Dear all, I am designing an Ultrafiltration (UF) membrane coupled with a CSTR. It is desired to utilized a dead end stirred reactor. The main purpose is to separate the enzyme used from the final...

27 January 2021 7,924 1 View

How can I use Non-dominated Strong Genetic algorithm(NSGA-II) for optimization?

I have a range of gas stream temperature, and I wanted to get the optimum temperature in the gas compressors.

14 January 2021 3,180 3 View

FSK modulation/demodulation with Fc=10MHZ to achieve a minimum 128kbps baud rate?

I would like to modulate and demodulate a binary stream of data at 128kbps baud rate using BFSK or N-FSK with carrier freq. of around 10 MHz. I have the following questions? 1) What is the...

12 January 2021 4,497 4 View

Detection of old river streams?

What are the methods of detecting the ancient streams of rivers using remote sensing, and do the satellite images achieve the possibility of detecting and tracking the change.

02 January 2021 5,213 4 View

What suitable boundary for stream function in inlets & outlets with COMSOL code?

As it has known the Dirichlet boundary condition is suitable for no-slip wall boundary for the stream function in COMSOL. I need to ask if I have an inlet and outlet I need to look for another...

02 January 2021 6,255 4 View

Can I calculate discharge of streams/ watersheds in GIS without field data?

I am required to do a project where I have to calculate discharge of streams/ watersheds in a high altitude area with extremely treacherous terrain. Will it be possible to achieve this objective...

27 December 2020 9,101 5 View

People from other streams can discuss well with life sciences?????

It is true, Whenever I have written something about some covid-19, most of the people in it are those who are not from life science, yet they keep their view, Others just read and leave, They...

22 December 2020 3,607 7 View

Please help me with this question?

In a heat exchanger, the cold stream is a corrosive material and it flows through the tube side. The shell side fluid is at a higher pressure than the tube side_ Recently one of the tubes in the...

01 December 2020 2,860 6 View