How I can prepare mammalian cell line from muscle?

I want to prepare mammalian cell line from muscle? can any body advice me?

21 January 2020 3,018 2 View

How can i simulate a batch reactor with a mixer and jacket in aspen plus?

i want to simulate nylon 6,6 polymerization process in aspen polymer plus,so i should simulate a batch reactor with mixer and jacket.

23 December 2016 6,014 8 View

How can I determine the percentage of secondary structures of proteins using the dssp file?

29 October 2014 9,434 3 View

Can anyone help with a microstrip patch antenna?

I have designed a microstrip patch antenna that works in 2.4 Ghz , but its bandwidth is 30 Mhz, I want to improve the BW, how can I do it?

08 April 2014 8,688 37 View

Is it possible to design a wearable microstrip antenna on roger substrate,or it is necessary to use textile substrate?

Much thanks.

27 February 2014 1,750 6 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

How two melting peaks in DSC of polypropylene can be merged into one crystallization peak?

The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...

03 March 2021 5,857 3 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

How to construct different filler shape in MD simulations?

Is there any way to construct different initial filler shapes like triangle, square, rectangle, pillar, and tube in any simulation software.

20 February 2021 1,750 1 View

How to calculate stress at the cross section of spherical particles within a matrix?

Hi all, I am currently working on some background calculations before I start a new project related to metal matrix particulate composites. I am trying to find a way to calculate the stress at...

19 February 2021 8,503 3 View

Drop weight impact testing machine for composites?

Dear all, I hope everyone is safe and healthy I do have a question please. Where can I find a drop-weight impact testing machine to test fiber reinforced polymer composite plates (CFRP and GFRP)...

17 February 2021 3,820 3 View

Aspen plus (hydrometallurgy set-up) & reactions solid-liquid ?

I have to simulate a hydrometallurgical process where there are the following phases: - leaching (solid-liquid reactions) - cementation (solid-liquid reactions) - electrowinning (energy ) -...

30 January 2021 9,225 3 View

What is the harmless way of cutting epoxy filled nanocomposite ?

I want to cut epoxy filled nanocomposite for FE-SEM analysis. What is the best way to cut it without resulting in any cracks or change in position or alignment of the particle reinforcement ? Also...

28 January 2021 7,084 5 View

How to know homogeneity of two thermoplastic polymer composite?

I have melt mixed to thermoplastic polymers. But I want to know the homogeneity of the composite. What are the methods to determine whether the composite is homogeneous or not? Please help.

20 January 2021 9,085 5 View

Continuum Damage in ANSYS Workbench?

Hey, i basically want to simulate a tensile test to validate the damage model of my composite material. When using the instant stiffness reduction the results converge but are not sufficent....

12 January 2021 2,313 3 View