See above.
May be you can use the XRF analysis to obtain cretain results of the elements.
Dear All. My research topic is Financial development, economic growth and FDI. What is the difference between the initial gdp and the lagged gdp variable found in the panel data economic growth...
08 March 2019 6,910 2 View
My dulition target is 10 pmol for primers. I dilute primers without any problem at qpcr, multiplex pcr and classic pcr. Sometimes, I diluted probes and it didn't work. What is the least/minimum...
17 December 2014 9,924 2 View
Can you give any suggestions?
12 May 2014 9,687 4 View
Can you give us an advice to write a good project proposals and improving technical/scientific writing skills?
12 May 2014 4,556 12 View
see above
27 March 2014 610 1 View
We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...
03 March 2021 7,975 3 View
I need to carry out molecular dynamics simulation on Aluminium alloy. For this i need the crystal structure that which could be further replicated to form a structure.
22 February 2021 1,410 1 View
I know that this is a very difficult question, as the areas of application can vary greatly. However, if you want to operate low as well as high resolution (from a few millimeters to nanometers),...
02 February 2021 4,985 4 View
I am working on XRD analysis of the clay minerals from the sea sediments. My XRD pattern shows very high counts at the start of the XRD pattern (3 degree 2 theta) which is very unusual. The counts...
31 January 2021 4,493 9 View
While CCS can be employed along with a conventional Carbon-efficient EAF steelmaking process (especially from iron ore) or even Hydrogen or hydrocarbon can bee passed through central electrode,...
30 January 2021 3,378 1 View
As suggested in the title I want to image my DNA nanoflowers/origami using SEM. These nanoparticles are an organic-inorganic particle made out of highly packed DNA and also contain magnesium...
28 January 2021 3,343 3 View
19 January 2021 3,792 3 View
Suppose one needs to find out room-temperature stable silicates chemical composition of a particular cation, suppose magnesium. Is there any rule to estimate which stoichiometric values of metal...
13 January 2021 7,385 4 View
We have prepared different alumina powders (fine/submicron-sized) from waste sources at different calcination temperatures (C.T.). From zeta potential-pH graph, we saw that IEP values decreased...
09 January 2021 9,404 3 View
I have come through a few literature,were the presence of particular clay mineral has been validated through the Si:Al ratio obtained from EDAX analysis. But, I would like to understand the basic...
08 January 2021 5,982 6 View